SLR9 1 HP Pump Above Ground Horizontal Discharge - 94022430

THIS PRODUCT IS OUT OF STOCK FOR THE SEASON

Part # 94022430

By Carvin


Details

Top

Part # 94022430

Alternate Part #'s 9402-2430, 94022430, S1TLR9-6-S1, S1TLR96S1

Availability This item will not be available until September 2018

Product Description

SLR9 WITH 6 FT. CORD AND 3-PRONG GROUNDED PLUG • SINGLE SPEED • 9 O'CLOCK HORIZONTAL DISCHARGE
Patented air-cooled heat sink allows pump to run dry without damage to shaft seal. Exclusive Ring-Lok strainer allows "tool-free" access to strainer basket. Internal ribs in large strainer basket assure flow even when filled with leaves and debris.

  • 60HZ
  • 115 Volt
  • 1.0 HP
  • 9.8 Amps
  • 23 lbs

Product Specifications

HP:
1 HP
Speed:
Single
Volts:
115 V
Amps:
9.8
Port Size:
1.5 in.
Cord Type:
6 foot/ 3 prong
Top

?     Asked on 4/20/2019 by Brian Porter

Will this pump work with a cfr50 filter?

 Reply

A  Answered on 4/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Brian. This pump will be too powerful to use with a 50 sq.ft. filter. The original model was a 3/4 HP pump.  
 Reply


?     Asked on 4/20/2019 by Brian Porter

Will this pump work with a jacuzzi cfr50 filter
 Reply

A  Answered on 4/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Brian. This pump will be too powerful to use with a 50 sq.ft. filter. The original model was a 3/4 HP pump.
 Reply


?     Asked on 3/26/2019 by Mr. P

Hello, I have a 12 foot above ground pool, about 5000 gallons. My filter motor is going bad and making a loud noise because of a bearing. I am wondering the cheapest way to fix this. Should I replace the motor with a pump and basket? Will this motor work? I am attaching pictures and hoping you can help. Thanks,

 Reply

A  Answered on 3/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Mr. P. You can use the ClearBay - PD1100-6 as a direct replacement. This SLR9 Horizontal Discharge will require the Interconnect Self Aligning Union Assembly - 42363408R000
 Reply


?     Asked on 6/4/2018 by Jack Kash

Will this replace a jacuzzi pump for a 120 sherlock filter?
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Joe S.

Good day, yes the SLR9 1 HP Pump Above Ground Horizontal Discharge will be a good replacement for the 120 sherlock filter.
 Reply


?     Asked on 1/11/2017 by Cynthia Laughlin

i have a s1-LR-6-S1 pool pump, the housing that holds the basket is cracked must i i buy the whole pump? It is a vertical setup what is your part no for that , 1 hp vertical?
 Reply

A  Answered on 1/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Cynthia. You can replace just the crack housing with P/N 16-1120-05-R or replace the entire pump depending on how long you've had it.
 Reply


?     Asked on 12/28/2016 by mike

I currently have a S1LRT9-3-LH pump on my Jacuzzi. I need to replace it. is the 94022430 pump that you have the proper replacement? or what is?
 Reply

A  Answered on 12/28/2016 by InyoPools Product Specialist Adam Y.

Good afternoon Mike, Here is a link to parts and motors Jacuzzi LR and SLR Series Parts
 Reply


?     Asked on 9/6/2016 by Alex

Hi, Can I replace with this SLR 9 my current Jacuzzi 1 HP horizontal discharge pump? Thanks.
 Reply

A  Answered on 9/8/2016 by InyoPools Product Specialist Lennox H.

Hi Alex, This pump can be used to replace a Jacuzzi  SLR pump with a horizontal discharge.
 Reply


?     Asked on 8/24/2016 by Gloria Yoon

I need this pump a 220v. So if I have a order, do you make a 220v? thanks.
 Reply

A  Answered on 8/24/2016 by InyoPools Product Specialist Scott W.

All of our above ground pool pumps are 115V.
 Reply


?     Asked on 8/21/2016 by Gloria Yoon

I need to this Jacuzzi pump and change 220volt . Do you have a 220V?
 Reply

A  Answered on 8/22/2016 by InyoPools Product Specialist Stacey M.

Hello Gloria, this particular one just comes in 115v, I can't find a 220v vertical discharge pump. All are 115v
 Reply


?     Asked on 8/3/2016 by

can I get this set up with a 2 speed motor. ?
 Reply

A  Answered on 8/6/2016 by InyoPools Product Specialist Lennox H.

Hi, This pump is not available with a 2-speed motor.
 Reply


?     Asked on 7/15/2016 by sally

I need to replace a Jacuzzi S55CXPED-7500CAT, 115 volts, 9.5 amps, RPM 3450 2 speed self priming motor......will this work?
 Reply

A  Answered on 7/16/2016 by InyoPools Product Specialist Lennox H.

Hi Sally, This pump can be used as a replacement, however, no longer available in a 2-speed option.
 Reply


?     Asked on 7/1/2016 by Jeff

Do you have a schematic for this with the dimensions and offsets to make sure it will fit my Splash Pak D40? Thanks
 Reply

A  Answered on 7/4/2016 by InyoPools Product Specialist Lennox H.

Hi Jeff, We do not have dimensions of this specific pump, but it will fit the Splash Pak DE40.
 Reply


?     Asked on 7/1/2016 by Jeff

Think this would be a good fit for a Jacuzzi Splash Pak D40 filter?
 Reply

A  Answered on 7/1/2016 by InyoPools Product Specialist Lennox H.

Hi Jeff, This SLR9 1 HP Pump will be adequate for the Jacuzzi Splash Pak D40 filter.
 Reply


?     Asked on 6/22/2016 by Jessica Zitzow

is this the same pump as my jacuzzi S1LR9-6?
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Lennox H.

Hi Jessica, This SLR9 Pump (94022430) is the same as the  S1LR9-6.
 Reply


?     Asked on 5/18/2016 by Linda

I have a Jacuzzi Avalance DE Filter, will this be a good replacement for the pump that it currently has?
 Reply

A  Answered on 5/19/2016 by InyoPools Product Specialist Lennox H.

Hi Linda, The SLR9 w/ Horizontal Discharge is a good replacement that will work with the Jacuzzi Avalanche DE Filter.
 Reply


?     Asked on 3/7/2016 by

How to prime the pump.
 Reply

A  Answered on 3/7/2016 by InyoPools Product Specialist Lennox H.

Hi, You can review our How To: Prime a Pool Pump guide to see how to prime a pool pump.
 Reply


?     Asked on 3/6/2016 by Tony

what is the flo-rate GPM for this pump (SLR9)
 Reply

A  Answered on 3/8/2016 by InyoPools Product Specialist Lennox H.

Hi Tony, You can view the performance data of the SLR9 pump via the SLR9 Spec Sheet.
 Reply


?     Asked on 6/23/2015 by Dave ring

Does this pump fit pro line or waterway fco75 filter
 Reply

A  Answered on 6/24/2015 by InyoPools Product Specialist Lennox H.

Hi Dave, The SLR9 1 HP Pump Above Ground Horizontal Discharge (94022430) can work with your Proline/Waterway FCO75 Filter. You will need the S15uns Half 1-1/2" Slip Union, (31175607) for the connections.
 Reply


?     Asked on 2/22/2015 by Robert

Does this pump have 2" inlets outlet or 1-1/2"?
 Reply

A  Answered on 2/23/2015 by InyoPools Product Specialist Robert M.

Hello Robert - The inlets for the SLR9 are 1.5".
 Reply