Heat Exchanger Assembly H150 UHSLN - FDXLHXA1150

$629.99

IN STOCK
FREE SHIPPING

Part # 6223-188

By Hayward Pool Products

  5 Average  

Details

Top

Part # 6223-188

Manufacturer Code FDXLHXA1150

Dimensions 15.5" L x 21" W x 5.5" D

Alternate Part #'s FDXLHXA1150

Product Description

Heat Exchanger Assembly H150 UHSLN - FDXLHXA1150

Top

?     Asked on 5/28/2019 by Rusty gordon

Is that the right exchanger for my heater?

 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Steve M.

Hi, Rusty. Based on the info I located this heat exchanger is the correct replacement.
 Reply

  • Commented on 8/2/2019 by Product Owner

    I have the same heater model # as above, but my heat exchanger looks slightly different than your picture.

     Reply


?     Asked on 10/14/2018 by Robin

Do you ship to Canada? Where are you located?
 Reply

A  Answered on 10/15/2018 by InyoPools Product Specialist Lennox H.

Hi, Robin. Yes, we can ship to Canada, we're located in the USA in the state of Florida. 
 Reply


?     Asked on 4/28/2018 by

will this fit a H150FD heater
 Reply

A  Answered on 4/28/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this will fit the H150FD model heater. 
 Reply


?     Asked on 8/29/2016 by Dave

How difficult to replace. Heat exchanger on h150 pool heater
 Reply

A  Answered on 8/31/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, It all depends on your level of experience if you have never replaced one the difficulty level would be 4 out of 5. Hayward does recommend that this part be installed by a pool professional.
 Reply


?     Asked on 8/29/2016 by Dave

How difficult to replace.
 Reply

A  Answered on 8/30/2016 by InyoPools Product Specialist Stacey M.

Hello Dave, I would have a professional install these units unless you have working knowledge of pool heaters, we recommend that you have a heater professional install and adjust this heat exchanger assembly. Gas heater can explode if installed incorrectly.
 Reply


?     Asked on 6/19/2015 by David

Should this item (Heat Exchanger Assembly) be installed only by a professional?
 Reply

A  Answered on 6/19/2015 by InyoPools Product Specialist Dennis R.

David, Yes, unless you have working knowledge of pool heaters, we recommend that you have a heater professional install and adjust this heat exchanger assembly. Gas heater can explode if installed incorrectly.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Drill with Phillips head screw

Heat exchanger leaking

Written on 6/24/2019 by Guest

Disassemble all side panels. Remove old heat exchanger. Lifts right out. Reattach all wires. Reinstall all side panels. Pretty simple. Keep screws separated and take pictures before removal

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver

Heat exchanger went bad because of incorrect pool chemistry

Written on 8/1/2017 by Guest

Unscrew top of heater. Keep screws together because there are a lot of them. Pretty easy except two screws were hidden underneath. Took old exchanger out and dropped new one in. Put all screws back. Time consuming but not too difficult but time consuming.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)