Part # 4600-5711
Manufacturer Code 155711
Alternate Part #'s 155711
Your Source for Swimming Pool & Spa Parts - INYOpools.com
Hose Dimensions: 34-1/2” long and the Outside Diameter of the hose is 1-3/4” (1-1/2” flex pipe)
I need an adaptor to go from 1 1/2" up to the 2 1/4" any sujestions.
Hi,Trupete. You may need the 1-1/2" MBT x 1-1/2" MPT Adapter - 417-4060.
I want to up grand this to 2" pvc. What connections do i need?
Wayne, This is a special hose assembly/fitting. You can not change the hose size to 2".
I need the nut ends to both be 2 1/4 inches dia
Hi, Cindy. The unions on this hose are 2-1/4" and 34-1/2" long.
How long is this hose I need 30"
This hose is 34-1/2". Please click this link for the 30" SD40 Sand Dollar Filter Hose
The hose Rob recommended is not like the one that I have. Mine has a screw down nut on both ends. Please let me know.
Jim, If you look at the photo closely, both nuts are present. The nuts are not glued into place and can slide from one end to the other.
I have a Pentair Sand Dollar filter 1.5 HP pump 22" tank SD 60. I need to replace the filter hose, the one from the motor to the filter is this the correct hose?
have a Pentair Sandollar pool pump sand filter 2014 motor model # DYNIINI. Will this hose work between pump and filter?
Hi Dale, This hose will connect the Pentair Sand Dollar filter to the Pentair Dynamo pump.
I'm running a Pentair 1.5 hp pump to a 22'' Pentair filter is this the hose I need ?
DC, What is the model number of the pump and filter?
What size is the connections? or Will this hose fit a Waterway Clearwater 22" High Rater Sand Fitler and I am running a Pentair Dynamo 1.5 Horsepower Above Ground Pool Pump - 340210. I am looking for a hose or connectors to go from pump discharge to filter inlet.
Hi Seth, This hose can be used with the Waterway Clearwater 22" filter and Pentair Dynamo pump.