NiteLighter - 12V, 100 Watt, Multi-Color Underwater Light - NLML



Model # NLML

By SmartPool



Model # NLML

Product Description

The NiteLighter from SmartPool is a 100 Watt multi-colored underwater lighting system that features a manual select or auto cycle. Nitelighter installs easily and requires no drilling or draining of the pool. The unit has a patented reflector design engineered for maximum illumination and efficiency. RGB halogen bulbs produce beautiful vibrant colors automatically, giving your pool a stylish appearance. One light is sufficient to illuminate most above ground pools. This unit will not interfere with the water return is tested to UL Standard 676 and Certified by ETL.

NiteLighter Features:
  • Easy installation- No cables or draining of pool
  • 12 Volt / 100 Watt outdoor pool transformer
  • Built-in 3 Hour timer with auto shut-off
  • 28 Ft. Cord (Including transformer and plug)
  • Chemical resistant lens and fuse overload protection
  • Stainless steel mounting bracket

Product Specifications

Cord Length:
28 ft.
100 W

?     Asked on 10/22/2018 by Heimanu

Hello, is this model compatible for a Discovery 15 'pool 52 "round

A  Answered on 10/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Heimanu. Yes, this NiteLighter Light is compatible with a Discovery above ground pool. 

?     Asked on 5/19/2018 by Marissa Zacarias

Is this not fixed in one place?

A  Answered on 5/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Marissa. This light once installed will be fixed in one place. However, it removable. See the Smart Pool NLML, NLMC Owner's Manual for installation instruction.  

?     Asked on 7/5/2017 by Eric

Hi. The light will be on then turn off...then comes back on again. The electricity feed is not the issue. Thinking the bulb within the Nitelighter may need to be replaced? Bit surprised because the Nitelighter has only experienced occasional use since I purchased it few years ago. Can you advise? Should I change the bulb? Thank you, Eric S

A  Answered on 7/23/2017 by InyoPools Product Specialist Alex V.

Eric, It sounds like the transformer is bad. 

?     Asked on 7/8/2016 by Johnny

I have an 18 x 33 foot oval above ground pool. The old light that finally gave out on me was a simple mount. Just loosen a section of top molding and hang over top, then re-install top molding. Plugged in and had on/off switch on transformer. What are differences with this light ?

A  Answered on 7/13/2016 by InyoPools Product Specialist Lennox H.

Hi Johnny, This light is a multi-color light that will be installed in a similar manner, please see installation instructions in the Smart Pool NLML, NLMC Owner's Manual.

?     Asked on 4/23/2013 by Guest

I have an in ground pool, but it does not have a light in it. Would the Smart Pool NiteLighter work?

A  Answered on 4/23/2013 by InyoPools Product Specialist Patrick P.

This particular light (NLML) is designed for an above ground pool. Because it has no wiring, it can be installed to an in ground pool. You may want to look at the installation design first though because the light attaches to a mounting bracket that is typically attached to your pool's top ledge. You may need to alter the mounting process to fit your pool, but the light should accommodate what you are looking for.You can take a look at the mounting process in the manual here.


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: