ChlorEase Salt Chlorine Generator A/G Pools - CL01

THIS PRODUCT IS NO LONGER AVAILABLE

Model # CL01

By SmartPool

  4.75 Average  

Details

Top

Model # CL01

Warranty One Year

Product Description

The ChlorEase Salt Chlorine Generator uses salt to create chlorine and sanitize above ground pools up to 18,000 gallons. 

  • Easily attaches under the top rail
  • Plugs into 110 volt GFCI outlet
  • Generates chlorine without irritating chloramines
  • Reduces chlorine odor
  • Reduces irritation of eyes, skin & hair
  • Softens water for silky feel
  • No need to handle chlorine tablets, granules or liquid
  • Add initial dose of salt one time
  • Minimal additional salt required for maintenance
  • For pools up to 18,000 gallons (larger pools can use 2 units)
  • ETL Listed to UL 1081

Please note: this system is for above ground steel wall pools only.  It is not for use with soft-sided pools.

Click here for more Salt Water Pool Systems

Top

?     Asked on 6/8/2017 by Dale Lanham

Why does the green light on my ChlorEase blink all the time?

A     Answered on 8/9/2017 by InyoPools Product Specialist Alex V.

Dale, I didn't find any information regarding your issue. I would recommend calling the manufacturer. You can reach SmartPool at 732-730-9880. 

?     Asked on 2/4/2017 by Janice

Do I need a saltwater pump or will my Hayward pump work?

A     Answered on 2/6/2017 by InyoPools Product Specialist Andy O.

Hello Janice- No, there is not special pump for a salt water system. You would use the same pump as you would on a regular chlorine pool.

?     Asked on 9/26/2016 by Elizabeth grosser

The Female end of theElectrical cord is missing. Can it be replaced

A     Answered on 9/30/2016 by InyoPools Product Specialist Alan M.

Unfortunately this is not a replaceable part.

?     Asked on 9/11/2016 by carrie

our black box on this runs green an only ran red when low salt now its blinking red not sure what its trying to tell us

A     Answered on 9/12/2016 by InyoPools Product Specialist Stacey M.

Hello Carrie, Unplug the unit and verify that you have power at the socket. Use a voltmeter to determine that you have 115vac output from the socket. If a voltmeter is not available, use a lamp or other appliance to verify that there is enough voltage being supplied to the socket. If there is no supply voltage, either repair the socket or plug the ChlorEase in elsewhere. If the socket is active, call 1-732-730-9880 for Customer Service.

?     Asked on 9/6/2016 by David Feldman

The indicator ( red led) in my smart pool system is blinking all the time when it is on. I cleaned the system as in the instructions. The salt level is O.k. .The chlorine generation is o.k.' just the led is blinking red instead of being green. What could be the problem?

A     Answered on 9/14/2016 by InyoPools Product Specialist Stacey M.

Hello David, normally when red light is on • Calcium build up on cell; refer to cleaning cell • ChlorEase is out of water. Place back in water immediately Or salt level needs to be adjusted. If you would like to talk to a tech 732-730-9880.

?     Asked on 8/21/2016 by Machinist

Does this unit have a cell that has to be cleaned if you have high limestone concentrations in your water?

A     Answered on 8/25/2016 by InyoPools Product Specialist Stacey M.

Hello, you can click here to read manual, Removing Scale from Elements Unsnap chlorinating cell from housing. Fill a deep container such as the milk carton with ChlorEase Clean or a similar mildly acidic product. Immerse the chlorinating cell only (NOT the housing) and let it set for 45 minutes. Hose off and inspect cell. All scale (cake-like white mineral buildup) should have dissolved. If scale remains, change cleaning solution and repeat process. DO NOT SCRAPE SCALE WITH ANY TYPE OF TOOLS OR BRUSHES AS IT WILL DAMAGE TITANIUM COATING AND VOID WARRANTY!

?     Asked on 7/14/2016 by ron segien

will this unit work on my kd 15 foot round pool.

A     Answered on 7/21/2016 by InyoPools Product Specialist Lennox H.

Hi Ron, You can use this ChlorEase system on your KD above ground pool  if you can properly secure it to the pool as shown in the SmartPool CL01 Owner's Manual.

?     Asked on 6/17/2016 by V Hedrick

Have had our Chlorease generator in about 3 weeks. Green and red light been flashing for day, this morning green light is out, red flashing. Salt level at 3610 and other chemicals seem withing balance. help

A     Answered on 6/19/2016 by InyoPools Product Specialist Alex V.

V, Unplug the unit and verify that you have power at the socket. Use a voltmeter to determine that you have 115vac output from the socket. If a voltmeter is not available, use a lamp or other appliance to verify that there is enough voltage being supplied to the socket. If there is no supply voltage, either repair the socket or plug the ChlorEase in elsewhere. If the socket is active, call 1-561-805-7778 for service.

?     Asked on 5/28/2016 by

Can this be used with aluminum pool walls?

A     Answered on 5/28/2016 by InyoPools Product Specialist Alex V.

Hello, It will depend on the pool manufacturer. Please refer to you warranty information to see if the addition of a salt system will void the warranty.

?     Asked on 3/9/2016 by

I'm buying your 15' round Matrix resin pool...will this work with that pool?

A     Answered on 3/9/2016 by InyoPools Product Specialist Andy O.

Hello1 The CL01 ChlorEase Salt Chlorine Generator A/G Pools will work on our Matrix resin pool.

?     Asked on 8/29/2015 by

Can this unit be used on a 310 gal spa?

A     Answered on 9/1/2015 by InyoPools Product Specialist Lennox H.

Hi, The ChlorEase Salt Chlorine Generator A/G Pools would not be recommended for a 310 gal spa. We do not have any salt system that can be used in a body of water that size.

?     Asked on 5/19/2015 by mark

i have above ground pool 10000 gallon how much salt do i neeed

A     Answered on 5/19/2015 by InyoPools Product Specialist Lennox H.

Mark, This ChlorEase Salt Chlorine Generator for A/G Pools requires a salt level of 3400-4000ppm. If you're starting from 0ppm which you will not, you'll need 335lbs of salt. Get your water tested first to be sure.

?     Asked on 4/29/2015 by

Can this be used with a Coleman above ground pool?

A     Answered on 4/29/2015 by InyoPools Product Specialist Robert M.

This will work if the outside pool wall is steel and not soft-sided.

?     Asked on 4/11/2015 by Sandy

How much salt is required to start up a 14500 gallon pool? We have been a chlorine pool up til this year.

A     Answered on 4/13/2015 by InyoPools Product Specialist Robert M.

Hello Sandy - You would require 465 pounds of salt.

?     Asked on 10/8/2012 by Guest

What is the difference between the Smart Pool ChlorEase CL01 and the Ultra CL02 generator besides the price?

A     Answered on 10/8/2012 by InyoPools Product Specialist Patrick P.

Functionally, both CL01 and CL02 generate chlorine for up to 18,000 gal AG pools. The CL02 adds an LED status indicator, an on/off control switch, and an on/off cycle.

?     Asked on 10/8/2012 by Guest

Can we use the Smart Pool CL01 in a hot tub?

A     Answered on 10/8/2012 by InyoPools Product Specialist Patrick P.

No, Smart Pool has advised us that the ChlorEase cannot be used in a hot tub.

?     Asked on 10/8/2012 by Guest

How can you tell if the Smart Pool ChlorEase is working?

A     Answered on 10/8/2012 by InyoPools Product Specialist Patrick P.

The submerged ChlorEase salt cell will release bubbles when the chlorinator is working.

?     Asked on 1/16/2012 by Guest

Can we use this system in our hot tub?

A     Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

No, the manufacturer advised us that the CL01 cannot be used in a hot tub.

?     Asked on 7/4/2011 by Guest

Will the CL01 saltwater swimming pool Chlorinator work on a Omego splash soft side pool?

A     Answered on 7/4/2011 by InyoPools Product Specialist Patrick P.

Unfortunately the CL01 will not work on a soft sided pool, for a soft sided pool we would suggest our solar powered salt chlorinator here >http://www.inyopools.com/Products/00100007061793.htm

?     Asked on 11/3/2010 by Guest

Can we use the CL01 on our Intex Pool?

A     Answered on 11/3/2010 by InyoPools Product Specialist Patrick P.

The manufacturer does not recommend the CL01 for Intex pools.

?     Asked on 6/2/2009 by Guest

How many gallons will this unit treat?

A     Answered on 6/2/2009 by InyoPools Product Specialist Patrick P.

The CL01 will treat up to 18,000. Pools that are over 18,000 gallons would require 2 units.

?     Asked on 3/14/2009 by Guest

Do you still run your pump as normal?

A     Answered on 3/14/2009 by InyoPools Product Specialist Patrick P.

Yes you would still run the pump as normal.

?     Asked on 4/30/2007 by Guest

How would I go about changing an above ground pool from chlorine to salt water? Can it be done?

A     Answered on 4/30/2007 by InyoPools Product Specialist Patrick P.

Yes this can be done. You would add the appropriate amount of salt to your pool according to the owner's manual. Once the salt chlorinator is installed the salt water which passes through the salt cell will create chlorine which is sent back to the pool, so you will actually be manufacturing your own chlorine. On most pools you want to maintain a Chlorine level of 3.0 PPM (Parts Per Million) so the first week or so you will be testing the water to try to get the unit dialed into the correct setting to maintain the 3.0 PPM of chlorine. Once you get the salt chlorinator dialed into the proper setting that is it. The nice thing about the salt chlorinators is that the amount of salt needed to maintain the pool is below the taste threshold so will not taste salt in the water of the pool.

Top

Review Summary

  (Average 4.75 out of 5 stars)
8 Rating
5 star:
 
(6)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews