Part # 025930002010
Part # 025930002010
Dimensions 12.5" L x 8.5" W x 6.5" D
Alternate Part #'s 02510986-2330, 02510986-2339, 02593001-2, 02593001-2010, 025930012010, 02593002-2000, 02593002-2500, 02593002-3, 02593002-3500, 02593446-2, 02593446-2010, 02593446-2020, 02593446-2110, 02593446-2510, 02593447-2, 02593447-2009, 02593447-2010, 02593447-2013, 02593447-2019, 02593447-2020, 02593447-2030, 02593447-2039, 02593447-2513, 02593447-2539, 02593492-2000, 02593640-2000, 02593650-2020, 02593654-2120, 02593657-2, 02593674-2, 02921001-2, 2593657-2, AF025930012010
Aqua-Flo Circ-Master Pump.
Aqua-Flo by Gecko's Circ-Master pump takes 24-hour filtration to a new level, delivering the highest GPM of any recirculation pump on the spa industry. Higher GPM allows the Circ-Master to operate a high-flow heating system resulting in increased heating efficiency and up to four times the filtration. Built for long lasting use, the Gecko Aqua-Flo Circ-Master Pump is a single-speed recirculation pump that provides continuous performance as well as energy efficient operation to portable spas. Its 48-frame design also features front and rear ball bearings for unbeatable performance and a longer lifespan. Engineered for center discharge installation, it includes a 1-1/2" inlet and outlet that connects to existing PVC piping, and its carbon-graphite seal is self-lubricating for continuous operation
Spa Pump Features:
**Warning - OEM pump manufacturers may change motor styles without notice. Pumps may be with or without a run capacitor.**
Click here for more Spa Pumps.
I have a big fish pond with a 1/2 h sta-lite lt series pump. Will this pump work?
Good morning John, This pump will not have the prime and the flow like the 1/2hp pump. I would just recommend replacing the motor on your current pump.
Can I remove wet end mount screws, and rotate the top out let to center let and reinstall the mount screws. thank you
Yes the wet end can be rotated to the left or right 90° (often found as 3 o'clock or 9 o'clock) This is simple to complete, loosen the 4 motor through bolts - rotate the wet end - tighten bolts.