Game SandPro 75 Pool Filter System - 4511


Model # 4511

By Game



Model # 4511

Alternate Part #'s GAM4511, GDP-05-4511

Product Description

Game SandPro 75 Pool Filter System

Quality filtration for above ground pools at a value price point.  Cleans up to 10 times faster than standard cartridge filter systems.  Affordable and efficient, our sand filter system outperforms cartridge filter systems and allows above ground pool owners to enjoy the cleaning benefits of a powerful pump and multi-port valve.

Key Features:

  • Ultra quiet and easy to use
  • Self priming pump
  • INTEX® 2 ¼ " hose adapters included
  • Conventional 32mm, 1 ¼ " and 1 ½ " hose fittings included
  • 7 position multi-port valve
  • Accurate and easy-to-read pressure gauge
  • Hair and lint strainer basket
  • Integrated base plate
  • Requires 75 lbs of #20 silica sand (not included)
  • Compatible with alternative sand products
  • Operates on 110v/60Hz
  • 1 year limited warranty
  • For pools up to 20,000 US gallons

Product Specifications

Filtration Area:
75 sq. ft.
Pump HP:
3/4 HP

?     Asked on 7/31/2020 by Heather Wilson

Sand keeps coming back through after vacuum , backwash, and rinse, what is the solution for this

A  Answered on 10/26/2020 by InyoPools Product Specialist Hector F.

Hi Heather, here is a guide that we put together called "Sand in Your Pool?" that should assist. 

?     Asked on 6/18/2018 by

Goodmorning. what is the compartment right below the to clear caps on thats on top of tank? the compartment thats next to where the sand is?

A  Answered on 6/18/2018 by InyoPools Product Specialist Lennox H.

The Separator Plate - AT2008 divides the tank into two compartments, the Filtered Water Chamber and the Sand Filter Chamber. 

?     Asked on 5/24/2017 by Pump part

can I buy the wet part of the pump? I don't need the motor just the plastic side that attaches to it. Mine has a crack in it.

A  Answered on 5/24/2017 by InyoPools Product Specialist Hector F.

Unfortunately, we do not carry the wet end parts for those pumps.

?     Asked on 5/30/2016 by Fernando

How do I clean out the garbage that the filter collects when running? Its my first time using this filter. Thanks

A  Answered on 5/30/2016 by InyoPools Product Specialist Patrick P.

Hi Fernando, Pages 18-21 of the Game SandPro Owner's Manual explains how to clean the filter.

?     Asked on 8/6/2015 by Luis Gonzalez

I need to know how much sand brings the warehouse , if you have marked the warehouse for filling sand

A  Answered on 8/6/2015 by InyoPools Product Specialist Hector F.

We do not retail the filter sand.

?     Asked on 7/19/2015 by Jesse

the motor went out on it turns out the capacitor went out. are those sold separately?

A  Answered on 7/19/2015 by InyoPools Product Specialist Hector F.

For this pump model we unfortunately do not carry the capacitors. The complete pump would need to be purchased.

?     Asked on 6/21/2015 by Linda nance

My bottom part of the sand filter split and they ordered me a new one with Game on it . Now that I have it working again . The top has a small crack and shoots out water. Can I order the top piece? I have $800.00 dollars already in this piece of junk and bought it in the mide of the summer. Thank you. My email is

A  Answered on 6/21/2015 by InyoPools Product Specialist Hector F.

Yes that lid is sold seperately. Click here to go to the lid's page.

?     Asked on 6/6/2015 by allen

Are parts available?

A  Answered on 6/6/2015 by InyoPools Product Specialist Joe S.

Hello Allen yes part are available at this link

?     Asked on 5/25/2015 by

we have had the sandpro 75 for our 2nd year now. when we hook it all up its runs good for a very short time then leaks heavily from the lid area. cannot figure out was is causing this any suggestions please

A  Answered on 5/25/2015 by InyoPools Product Specialist Patrick P.

I would suggest either the valve gasket kit here or the lid assembly here. You may view the parts breakdown for the Game Sand Pro here.

?     Asked on 5/5/2015 by Moe

I have a sand pro filter that I can not stop it from leaking. I think it is the gasket,under the lid. Also how tight should the ring be ?

A  Answered on 5/5/2015 by InyoPools Product Specialist Lennox H.

Moe, I would recommend replacing the VALVE GASKET KIT so that way you don't change one gasket and then have to replace another because you're still having the same issue.