$3,191.99
By ELM Distribution
Model # AQI2P4X1010
Warranty 10 Years
INYO's solar heating system is a high quality polypropylene panel system available in 4'x10' panel equipped with 2" headers. Due to shipping and handling constraints, Piping for the system is to be purchased locally. To determine the number of panels needed for an operation, you must first calculate the surface area of your pool. Next, you would then purchase panels for 50-60 % of the pool surface area. For Example: A 400 sq. ft. surface area pool would use 6 - 4 x 10 solar collectors for a total panel area of 240 sq. ft.
Please Note: One (1) System Kit is required for EACH complete solar panel system.
How the system works...
INYO's solar panels are generally mounted on one's roof however, they are also capable of being attached to a ground rack. Using the pool pump, water is circulated through solar panels to heat your water. Pool water is heated in the high performance solar panels and returned to the pool through your existing piping.
Do The panels lay right on the roof
Reply
Our SunGrabber solar pool heating system is comprised of a base package with two panels and related hardware. Additional panels can be added to the system to achieve optimal coverage. For total solar pool heating, the solar panel square footage should be equal to 50% of the pool's surface area. You will need to attach the panels to your roof, with hardware provided
Reply
What is the temprature range of heating, spevifically, can this system be used in a pool w/hot tub, to heat both?
Reply
Hi. A Solar Controller which is required can heat to about 100 degrees but will not exceed 104 degrees. It can be used to heat a pool and hot tub.
Reply
does kit AQ12P4X1010 Ccme with 10 hardware kits to connect them together .? does it come with high wind hold downs and straps? What does the hardware kit consist of.?
Reply
Hi, Wade. This kit includes (10) 4' x 10' Pool Solar Panel w/ 2" Headers - AQI1020410, (10) 2" Panel Installation Kit - AQI120342, (1) 2" System Kit - AQI121352 and (1) Hold-Down Strap (107 ft. Roll) - AQI100352.
Reply
If i put 4 panels down low and the rest high on the roof how many relief valves do i need ? How many relief valves comes with kit AQ12P4X1010 ?
Reply
Hi, Edward. You may only need one relief valve depending on the installation of the panels. These kit only comes with one relief valve.
Reply
