Natural Chemistry SPA PURGE 1L - 04137

$16.99

IN STOCK

Model # 04137

By Natural Chemistry

  5 Average  

Details

Top

Model # 04137

Product Description

Natural Chemistry Spa Purge 1 Liter - Cleans Where You Can't!

Spa Purge is a highly concentrated, acid-free formula that deep cleans spa plumbing before initial fill and with regular water changes. Its easy and safe to use!

Features:

  • Non-toxic and will not harm the environment
  • Removes unwanted build up in spa plumbing
  • Attacks root causes of maintenance problems, especially organic contamination
  • Compatible with all sanitizing systems

Dosage:

  • One 33.9oz (1L) bottle for spas up to 1,000 gallons (3,800L)

How to Apply:

  1. Remove cartridge filter elements
  2. With spa water temperature at 95 degrees or higher, add entire contents of 33.9oz (1L) Spa Purge to spa water
  3. Run jets a minimum of 5 minutes ** If exessive foaming occurs, turn jets OFF
  4. Maintain water temperature and allow spa to circulate overnight with jets off
  5. Drain spa, rinse and then refill spa and reinstall filter elements. Proceed with normal spa maintenance

Tips:

  • For a more complete spa cleaning, soak cartridge filter elements overnight in the only all natural filter cleaner: Filter Perfect To prevent future build up of organics, use Natural Chemistry's Spa Perfect weekly


Features & Benefits:

  • Attacks the root cause of maintenance problems caused by organic contamination.
  • Highly concentrated formula.
  • Restores spa plumbing to original condition.
  • Removes organic waste deposits from all spa plumbing

For our complete line of Natural Chemistry Pool & Spa Chemicals

Product Specifications

Size:
1 L
Top

?     Asked on 1/26/2017 by Annie

Will Spa Purge be effective if just used for a couple of hours? The Hot Tub is brand new and only used a week. The reason for draining it is that chlorine was not added when we set up the tub and the water turned cloudy. Do I need to do a rinse after using Spa Purge or can I just refill?
 Reply

A  Answered on 1/26/2017 by InyoPools Product Specialist Adam Y.

If your Hot tub is brand new. You do not need this product. This is for spa cleaning.
 Reply


?     Asked on 11/29/2012 by Guest

Can Spa Purge be used in a jetted tub?
 Reply

A  Answered on 11/29/2012 by InyoPools Product Specialist Patrick P.

Yes, Spa Purge can be used in jetted tubs. You would have to add the Spa Purge and run the jets for approximately 5 minutes. After that, you would let it sit over night and drain and rinse the tub with warm water the next day.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

I Always Clean the Spa Jets.

Written on 12/5/2018 by Guest

I take out the filter and bromine floater. I then run the spa jet cleaner for two days.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews