One 4' Cable,1/2 Swivel,3 Wires,NO Plug - 9995821-SGL

THIS PRODUCT IS NO LONGER AVAILABLE

Part # 9995821-SGL

By Maytronics


Details

Top

Part # 9995821-SGL

Availability Please allow 3 - 4 weeks for delivery - SPECIAL ORDER

Product Description

Single 4' Cable, with partial Swivel, 3 wires with NO plug. A retrofit kit must be purchased separately to attach an ASSY motor plug.

This short 4’ cable replaces the cable section between the motor and part of the Swivel. The Swivel comes apart to accept the replacement so the original cable has to have a Swivel to use this short cable. These short cables are generally sold with two motor plug designs, ASSY and DIY as described below.

Maytronics Robotic Cables are currently designated as Assembly (ASSY) or DIY (Do It Yourself) depending on the design of the plug on the motor end of the cable. For most of the older Robotic models, the cord was installed through the small hole in the SIDE panel of the cleaner. The opening on the side was too small for the cord to go through with the plug on the end, so the wires needed to be threaded through the opening first and then attached to a plug with a Retrofit Kit before being connected to the motor. These cables with “assembled” plugs are designated as “ASSY” at the end of the cable’s manufacturing code.

To improve the plug design, Maytronics created a molded plug that is permanently attached to the motor end of the cable. Instead of coming through the small hole in the side, the cable enters through the TOP of the cleaner and is simply plugged into the top of the motor. Because this cable design is much simpler to install, it is designated as “DIY” for Do It Yourself at the end of the cable’s manufacturing code.

For more information on these cables descriptions, see our guide on “How to Select the Right Maytronics Dolphin Cleaner Replacement Cable”.

Top

?     Asked on 6/15/2017 by John Fredenburg

Will this swivel work to install on a dolphin quantum Thank
 Reply

A  Answered on 6/22/2017 by InyoPools Product Specialist Lennox H.

Hi, John. This cable will not work with the Dolphin Quantum you'll need p/n 99958903-DIY which will have to be special ordered.
 Reply


?     Asked on 8/28/2016 by chris

The swivel has been pulled apart and wont make good contact anymore. I just need to replace this - is this the correct part. I can't find any pictures to verify. I have a Dolphin Premier. thanks
 Reply

A  Answered on 8/29/2016 by InyoPools Product Specialist Stacey M.

Hello Chris, This SINGLE SWIVEL DYN 1.2M 9995821-SGL is under parts list for Maytronics Dolphin Premier Parts. Just to check you can double check part from Maytronics 888-365-7446.
 Reply