By Custom Molded Products
Part # 25576-220-000
Alternate Part #'s _25576-220-000, CMP25576-220-000, CMP25576220000, CTM-27-5020
One of the most popular waterfalls on the market, is the Original Waterfall which creates a beautiful sheet flow effect. The combination of smooth flowing water and the relaxing sound of the fall transforms your pool into a backyard paradise.
This Original Waterfall is bottom fed which means the port which the plumbing is connected to is located at the bottom of the waterfall. The 24-inch waterfall requires a pump that can provide 24 gallons per minute (GPM); pump is sold separately.
The Original is also available as the Nova Fall which has fiber optic cable attached to create a stunning illuminated waterfall. For more information on the Nova Falls, click here.
To learn more about waterfalls and installation, please see our Waterfall Guide.
Back Port Vs. Bottom Port: This waterfall is a bottom fed waterfall meaning the water is attached to the bottom of the waterfall as shown in the image below labeled Bottom Port.
Note: The images below show a back fed waterfall, this particular waterfall is a bottom fed waterfall meaning the water port will be located at the bottom of the waterfall and not the back as depicted in the image below.
the base of the 2 inch pipe is 6 inches from the edge of the pool. With the slip on adapter, do I need a less than 6 inch extention to the top where the water comes out so that it does not extend over the edge of the pool?
Reply
Hi Larry, Yes in your scenario I would suggest the 1" lip waterfall which has a total width of 4-3/4".
Reply