Part # LPL-G-P
The Guardian silicone lens gasket is designed to outlast the standard Pentair Amerlite gasket. Standard rubber gaskets typically last only for the average life of an incandescent bulb, about 2,500 hours. Guardian silicone is far more durable and designed to last for the much longer lifespan of an LED lamp, about 30,000 hours.
Note: For use with Pentair Amerlite light only
Hi I am looking for a gasket for the name on my pool light lens "American Product 3915" is this the correct gasket? I do not think mine is an Led light. Please help!!
Hi, Leigh-Ann. This Amerlite Extra Heavy Duty Lens Gasket will work as a replacement.
Which side of the gasket goes against the casing? The gasket is different than the amerilite. The J&J has one side with the rib and the other is flat. I can't find any guidance on this anywhere.
Hi, Mystierob. This Guardian Silicone Amerlite does not have an installation orientation. You may have received an incorrect or defective part.
Thank you for answering my question on the heavy duty gasket. Can you recommend as an LED bulb replacement. I don't need the color changing option. Thank you again My Pentair amerlite says 7884xx, 7844xx, 7894xx
The only numbers on my Pentair Amerlite that I can find are 7884xx, 7844xx, 7894xx. Will this heavy duty gasket work for me? Thanks
Hi, Leo. Yes, this Extra Heavy Duty Gasket will fit your fixture.
I live in San Antonio, TX and have an old Gary Pool. The only label I can find on the pool light fixture is a UL Underwater light label that says Model 425 and uses an R40 light bulb. The gasket seal for the lens is 7 and 3/4" diameter.
I would like to upgrade with an LED kit but I have no idea what kit will fit/work. Any help would be appreciated.
I have a Pentair light system in my inground pool . the bulbs have burnt out. the only numbers i could find are MR16 71W 165 WATTS 120 VOLTS. I was wondering if you could help me locate these. they are 4 color changing bulbs
the number on my light says T-702552 by pentair. about 13 years old. will this gasket fit?
Hi John, We're unable to confirm if this gasket will fit based on the info provided. We will need the series and or the model number of the light.
American Products Lights
Same lights, glass diameter is:4 1/16" X3/16" thickness
I need gaskets, silicon preferred.
In bad need of these or information as to where they could be located.
These were installed in 1999.
Thanks for you time.
Hi Sam, you will need the Pentair SpaBrite Guardian Silicone Lens Gasket (LPL-M-G-P).
whqt are the dimensions of this gasket. my pool was installed in 1977 and I'm having a hard time finding the right size for my light the 8 3/8 pentair gasket is a little too small.
The dimensions of this large gasket are 8-1/2" L X 8-1/2" X 1/2" D.
My light says, "American Products Company 3915". It doesn't appear to have any other markings. Is this gasket compatible?
HI Lou, This Guardian Silicone Lens Gasket is compatible with the American Products in-ground pool light fixture.
Does the above gasket set have one for the large niche and one for the small niche? I need one of each. How do I order?
(5 out of 5 stars) Guardian Silicone Lens Extra Heavy Duty Gasket for Pentair Amerilite
Reviewed By: Gregory Z. from Los Angeles, CA ()
Pros: Silicone construction
This pool light gasket is far and above the original gasket supplied with the Amerilite gasket. Being made of silicone it offers far more resiliance and compressabilty and will far outlive the original at less cost.