|
|
Shop by Category:
|
|
|
Product Specifications
|
|
Part #:
600
|
|
Manufacturer:
Sophisticated Systems Inc
|
|
|
|
Back to Top
|
|
Product Description
|
The Uniclor Model 600
- The UNICLOR converts salt into its two basic elements: chlorine and sodium. A 40 pound bag of water softener salt contains 24 pounds of pure chlorine. This is the same amount of chlorine contained in 37 pounds of calcium hypochlorite or 55 gallons of household bleach.
o
- The UNICLOR cell is divided into 2 chambers. An 80 pound bag of salt is poured into one chamber and water is added to the second chamber.
- No hazardous material is handled or stored.
- When the pool pump is turned on, the power supply sends a low voltage DC current to the cell at a power level selected by turning a knob.
- When the salt brine is electrolyzed, the chlorine and sodium are seperated. The chlorine bubbles up through the salt solution and is drawn from the cell with a vacuum created by the venturi. The sodium is drawn to the cathode where it becomes 3% sodium hydroxide solution which is mixed with the chlorine and drawn from the cell by the venturi to help balance the pH.
- Seperation of the two solutions is maintained because they are two different densities. The sodium hydroxide is lighter than the salt brine and therefore "floats" on top. The anode is in the salt brine and the cathode is just above the salt brine in the sodium hydroxide solution.
- Effectively chlorinates an average 10,000 gallon pool
System Components
- System contains Power Supply, Cell & Venturi
- Includes Associated Fittings & Tubing
Sanitizing Capacity
- The UNICLOR model 600 will provide chlorine necessary to sanitize most residential pools up to 10,000 gallons.
Maintenance Requirements
- The average residential pool will use three to four 40 pound bags of salt per year. Consumption will vary according to bather load and weather
- A simple electrode replacement may be necessary after 3 to 6 years of residential service. More frequent service my be required in commercial applications.
- The UNICLOR system can be configured to accommodate almost any water treatment application. The system configuration will dictate the exact maintenance required.
Cost of Operation
- In addition to salt and anodes the UNICLOR system requires electricity, approximately 1.8 KWH per pound of chlorine produced. Total operating costs for a normal residential pool is about 11 cents per day.
System Specifications
- Voltage: 120V/240V
- Input: 2 amps @ 120V, 1 amp @ 240V
- Output: 8.5 volts DC
|
|
|
|
Back to Top
|
|
|