Model # CPVM1C2040
CINDERELLA VM-1 VERTICAL MOUNT COPING With LINER TRACK
Features:
Technical Specs:
I have a few questions.
1) What do you mean by "Field Bendable" I need to bent it into 7 foot radius arcs. Can I do this by hand easlily?
2) Would 316 Stainless Steel Rivets be a better solution than using #10 Self Tapping Screws? FYI: The ones I thinking about have Shear Strength and Tensile Strength of 1,000 lbs each.
3) How thick is the material on the long side? For Rivet question.
Thanks in advance.
Reply
Yes, you can easily bend this coping at installation to a 7 foot radius. You should bend as you are screwing it in place. I have not had anyone use a stainless rivet before to my knowledge so I'm not really sure. I do know using the screws if quite simple and no pre drilling is necessary.
Reply
Only need 10 pieces... not a case of 15. Can you buy as individual pieces? What is cost?
Or... only by the case. thanks.
Reply
We can sell individual pieces. The part number per piece would be CPVM109600
Reply
I too am converting a Polynesian low hung, 16x32 rectangle with the radius/rounded corners, are there curved sections available to fit that?
Reply
The VM1 extrusion is bendable in the field down to a 6" radius.
Reply
what determines whether you need 12" or 24" legs on the rounded corners?
Reply
The legs are just the straight pieces of coping that come off the radius. You would just need to cut the legs to the desired length, so if you think 12" would be sufficient then you would go with 12" and if you need a bit more then you would go with 24"
Reply
i am wanting to place a vinyl liner in a fiberglass pool, Is this the coping I need, or do you offer something else more appropriate?
Reply
This Cinderella VM1 is the best choice for your application, make sure to use stainless steel screws, which will need to be installed 6" apart.
Reply
I am installing a custom above ground pool based on fanta sea/kayak design. Can I use this product instead of coping? Using a beaded liner
Reply
Hi, Mike. Unfortunately, I'm unable to confirm if you can use this coping. I would recommend you verify with the pool manufacturer.
Reply
will this liner track work with all vinyl liners? We want to order the 37 mm thickness liner but want to make sure this will work before we buy. Also, do we need to buy the beaded liner lock to use with this liner?
Reply
Joe, This is designed to work with in ground beaded liners. You can use the liner lock but most new installs do not need it.
Reply
I am using this product to convert a Polynesian low hung liner pool to a top hung liner., I have already ordered this through your website. I am looking for installation help. How many screws are recommended per foot when installing the product?
Reply
Bryan, The screws can be placed every 6" (minimum 2 per feet).
Reply
I am building a concreate block liner pool 18x38 pool with a roman entrance on one end. can this track be bent to fit the roman entrance.
Reply
Yes, let me know what degree you need the radius and I can get a quote for you.
Reply
We are replacing our liner and noticed our coping is beginning to break down, will this vertical mount liner track fit under our existing coping as a repair versus removing the original coping?
Reply
Hi Doug, These coping are not meant for repairs. If you have these VM1 coping then you can replace sections or you will have to replace all of the coping.
Reply
I am installing a vinyl liner in a concrete pool. A double roman end.. Will this product bend in order to make the curves at ends? Is it plastic or aluminum?
Reply
Hello David - The product is Quality Extruded Aluminum and Custom Bending & Welding - 3 - 5 Day Lead Time is available.
Reply
The Most Helpful Review
7 0
(5 out of 5 stars) Great product for old concrete pools
Reviewed By: Mark P. from Southern Indiana ()
Pros: Aluminum (sturdy), not plastic
Cons: Would not bend into tight corners
We have a ~30 year old in-ground concrete pool. I was tired of painting it every 2-3 years at a cost of $300. Our last paint job did not do well. It began cracking and peeling and we fought a leak somewhere in the sidewall. Our solution was to install a liner but the pool does not have the coping to accept a beaded liner. This liner track worked great. I installed the track just below the coping with stainless steel screws spaced approx 6" apart. The only difficulty was matching the corners. I would buy this product again.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Happy Customer
Reviewed By: Anthony from San Diego, CA ()
Pros: Excellent material and product, lowest price on internet and fast shipping
Cons: None
Was extremely impressed with the website and the product. Price was lower then the other two companies and the website was easy to navigate through and look at the different designs of bead. I went with the side configuration because of our coping. We ordered it and it arrived in San Diego within two days (free shipping). The product is all aluminum, very study and power-coated. Excellent product, price was unbeatable, and shipping was fast. You have made me a satisfied, happy customer and I will be ordering from you again when I need something your company sells.
Was this review helpful to you?
(5 out of 5 stars) Great for pool update
Reviewed By: Gene from Augusta, GA ()
Pros: easy to work with.
Cons: none
I used this track so I could add a vinyl liner to a 25 year old concrete block pool. Best price I found.
Was this review helpful to you?
2 0
(4 out of 5 stars) very satisfied !!!
Reviewed By: Thomas K. from youngstown, OH ()
great product at the best price on the net...fast shipping...couldnt be happier...thanks inyo pool!
Was this review helpful to you?