Model # 45310
Alternate Part #'s LT45310EACH, LZA45310A
Replenish is a 4-in-1 blend that combines the power of Oxone® with chlorine to shock, oxidize, buffer and clarify spa water. It is ideal for spas with mineral systems and is compatible with chlorine and bromine sanitizers. Replenish is completely soluble, dissolves quickly and keeps spa water clear and inviting.
FEATURES:
APPLICATIONS:
Directions for Normal Bathing Loads :
For most spas with normal bathing loads, Replenish should be added after every use and once each week for maintenance. Add one and one-half (1 ½) ounces of Replenish for every 300 gallons of spa water uniformly over the surface of the water. Apply when the spa is not in use. Each ounce of Replenish will raise the free chlorine concentration by about 2 ppm in 300 gallons of water. Test the sanitizer level prior to re-entry to ensure the residual sanitizer concentration is between 1-3 ppm.
SIZE
2 lb.
TIPS
Always add Replenish with pump and filter operating to ensure complete mixing and good circulation.
COMPATIBLE WITH
Chlorine, bromine, ozone and salt water sanitizing systems
ADVANTAGES
Replenish is completely soluble and dissolves quickly, so no mixing is required..
See more pool chemicals.
Less than 1 hr
None
1. ALWAYS after using spa for the day put one cap full of Replenish into the spa water with the pump on high and bubbler on.
2. Let run for at least 20 minutes or until its programmed run time takes over.
3. By the next day your spa water should be clear.
4. This is the only product that has kept my water clear.
The Most Recent Reviews
(5 out of 5 stars) No More Cloudy Spa Water!
Reviewed By: Mack ()
The only product I have found that gives me consistent clear spa water!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Linda H. from Bloomfield, IA ()
This is a great product for our hot tub. We use it every time we get out and it keeps the chlorine level up and the water stays crystal clean.
Was this review helpful to you?