Part # 1320178
Top Plate Imperial, Liberty, Ambassador, Eden, Admiral, Prestige (Single)
Used on the following Pools
For More Above Ground Pool Parts
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
PART#1321078 TOP PLATE RESIN, WILL IT FIT A LIGHTHOUSE INFINITY POOL FROM THE YEAR 1978.
Hi, Karen. Unfortunately, we do not have any info confirming that this Plate can be used with any Lighthouse model pool.
Less than 1 hr
Power drill with socket and Phillip screw driver bit.
Took off front and rear ledge cover. Removed the four screws from the ledges. Took off three screws from old plate and replaced with new plates. Replaced screws and completed the reinstallation of the ledges. Placed rear ledge cover back on and front ledge cover. Took approximately 10 minutes to complete entire process.
1 to 2 hrs
First step was to remove the top plate plastic covers from 3 sections of the pool. Then the top rails could be removed from two sections to allow full access to the rusty top plate.
Removed three screws which fastened the top plate to the upright and carefully removed the rusty top plate. This was also the perfect time to treat the inside walls of the upright with some bug killer (lots of spiders in the South).
Installed new top plate with new stainless steel screws and then reinstalled the top rails with new stainless steel screws. Last step was to reinstall the plastic top plate covers. Perfect fit with no issues.
(5 out of 5 stars) Perfect replacement part!
Reviewed By: ()
I've been hunting replacement parts for a 25 year old Leisure Bay 24' above ground pool for quite some time. Wasn't having any luck till I happened upon the INYOPOOLS website. Finally able to replace some rusty sheet metal. The detailed and dimensioned images on your web site are perfect and helped me cross over the parts that would fit. Thanks.