$26.24

Qty:

By Wilbar


Details

Top

Part # 1490479

Alternate Part #'s 1490546

Product Description

Upper -Top Connector J4000 (Single) Upper -Top Connector J4000 Mist (Single) Replaced by Ledge Cover - Upper J4000 Beige (Single) - 1490546

This part is Mist (light gray). We also have a beige version. The part number is 1490546.

Upper -Top Connector J4000 Mist (Single) No longer Available in Gray, Replaced by Beige Part# 1490479. The Top Connector Support J4000 (Single) - 1490520 in beige. 

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright 

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 

 

Top

?     Asked on 5/17/2019by Heather Taylor

So is the grey verion of the concord mist not available?
 Reply

A  Answered on 5/18/2019 by InyoPools Product Specialist Michelle B.

Unfortunately, the grey color of this is not available.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Danger broken top cover

Written on 6/22/2020 by Guest

After searching in multiple website I found it here. I remove two screws that hold the cover to the pool. Remove the cover, inside cover remove another two that keep together top cover and bottom cover. Replace cover bought it in INYO Pools and install inside screws back. You may need to apply a little force to screw in. New cover does not coming with holes, I like this because screws tight perfect. Put cover to pool and install screws. Enjoy your new cover.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

None

Many of the plastic top connector covers are breaking after 10 years.

Written on 8/24/2019 by Guest

Many of the plastic top connector covers are breaking after 10 years. The little clips that hold the cover on are breaking.

Pop off the old cover and carefully place the new ones on.
You have to be a bit careful to not break the new clips.
I clip the back of the cover on first then bend the clips in a bit to clip them on.

Unfortunately I need grey caps which they no longer had in stock so I bought some plastic spray paint to change from beige to grey.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews