$31.49
By Wilbar
Part # 1072407160000
Stabilizer - 24'D Champagne Universal (Single)
Fits the following Pools:
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
How to Measure the Length of a Stabilizer
1) Use a flexible measuring tape. We found that a tailoring tape worked best.
2) Measure from one end, along the outside bend, to the opposite end.
Less than 1 hr
Screwdriver, battery driver
extract broken parts from pool. Remove ledge cover by slightly prying out and up. Remove phillips screws, from the ledge, remove securing clip from inside pool on one end, slid the stabilizer out and new one in, locate new ledge covers over existing holes, insert screws and tighten screws. and done. Parts are an exact match to the original, color matches perfect.
