Part # 1071407100
Aqua Leader Stabilizer (Single)
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
Less than 1 hr
Screwdriver, Rubber mallet
After removing the old parts, I was able to pound out my 52" upright and top plate. I also hand to pound out the side of my pool with my hands and a rubber mallet. I was then able to slowly push the rounded stabilizer on the pool liner and side wall. I made sure it was evenly placed between the two uprights. I was the able to replace the two cracked upright stabilizer caps and then screw it and the top plate using the screws provided. Finally a attached the pool ledge covers.