Aqua Fusion Suction Pool Cleaner - PL1802

$129.99

IN STOCK
FREE SHIPPING

Model # PL1802

By PureLine

  3.67 Average  

Details

Top

Model # PL1802

Product Description



AQUA FUSION SUCTION POOL CLEANER

The Aqua Fusion suction pool cleaner takes the work out of owning a pool. This Aqua Fusion automatically cleans your pool meaning you no longer have to manually vacuum your pool. The Aqua Fusion runs off your existing pool filter pump meaning simple operation. The Aqua Fusion pool cleaner is comparable to brands like the Barracuda, Kreepy Krauly and Hayward but at a fraction of the price.

FEATURES:

  • Removes dirt, leaves, pebbles, tree seeds, hair, sand and much more
  • Inground Pools or Above Ground Pools
  • 32 Ft. of Hose Included
  • Pools up to 9 Ft. Deep
  • Runs off of your filter pump (.75 HP to 1.5 HP)
  • Easy to install, no tools needed
  • Silent Operation
  • 1-year warranty

COMPATIBILITY:

  • Concrete Pools, Gunite, Diamond Brite, Pebble Tech, Vinyl Liner, Fiberglass and Tile

Product Specifications

Cleaner Type:
Suction
Length of Hose:
32'
Climbs Walls:
Yes
Top

?     Asked on 10/9/2019 by Larry McCoy

My pool cleaner will not move anymore but I can hear it sucking. I also have change the filter.
 Reply

A  Answered on 10/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Larry. Inspect the cleaner to make sure that the Flow Valve is flapping back and forth. If it is, then check the Foot Pad for wear grove.  
 Reply


?     Asked on 9/7/2019 by Mary Ann

Did I read that the Aqua Fusion should be left in the pool between cleanings? The other units recommend removing after each use.
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

Most manufacturers recommend leaving the cleaner in the pools however if you decide to remove it make sure that if you have a designated line for the cleaner that it is closed, and that you rinse the cleaner storing it in the shade. 
 Reply


?     Asked on 7/3/2019 by Tara DuBose

Where do you connect this product to your pool? Also, what are those other parts in the picture for?
 Reply

A  Answered on 7/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Tara. This cleaner will connect to your skimmer or a vacuum line if you have one. 
 Reply


?     Asked on 6/17/2019 by michael brown

does this come all assembled?
 Reply

A  Answered on 6/19/2019 by InyoPools Product Specialist Hector F.

No, this cleaner will require some assembly. 
 Reply


?     Asked on 7/5/2018 by Joshua

Another question, I have retrofitted my pools filtration system to work with my sand filter pump, can this product work with it ? I have a summer waves elite pool 16×48, above ground. Thank you.
 Reply

A  Answered on 7/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Joshua. This cleaner is not suitable for soft side pools. 
 Reply


?     Asked on 7/5/2018 by Joshua

Can this product be hooked up to a sand filter pump.
 Reply

A  Answered on 7/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Joshua. Yes, this cleaner can be operated by a suitable sand filtration system. 
 Reply


?     Asked on 6/29/2018 by Cindy

Just got my pool cleaner today and it will work for a few minutes and quit. If I turn it upside down it will start again for awhile and quit again. Seems to have a really good suction power, but it just isn't moving. How can I fix it?
 Reply

A  Answered on 6/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Cindy. You may have too much suction, try using the Regulator Valve if it's not installed. 
 Reply


?     Asked on 6/23/2018 by Teresa

Is there a manual available for this vacuum?
 Reply

A  Answered on 6/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Teresa. A manual is included with the unit, we do not have a pdf copy. 
 Reply


?     Asked on 6/23/2018 by Teresa

Can this vacuum stay attached for continuous use or do I have to detach it?
 Reply

A  Answered on 6/25/2018 by InyoPools Product Specialist Hector F.

The manufacturers of these cleaners usually recommend to keep them in the pool but you can detach them if you prefer to. 
 Reply


?     Asked on 5/29/2018 by

performance on pebble-tec pools
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Lennox H.

Hi. This cleaner will work fine with a pebble-tec pool surface. 
 Reply


?     Asked on 5/28/2018 by Ineed2Know

Does this clean the algae on the side walls as well as the bottom surface?
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Hector F.

Whether these or most cleaners will go up pool walls ultimately depends on the pool design, equipment and system settings such as jets and valves. In the end, we do not recommend to utilize a cleaner for algae or dirt removal of the walls. We recommend weekly brushing and chemical treatment if there is algae present. If the cleaner removes algae without brushing or chemical treatment it will come back shortly after and a cleaner cannot always remove algae if it has rooted well enough into the pool finish. 
 Reply


?     Asked on 5/28/2018 by paul

will this run by itself by just hooking it to the pool suction port to the filter..Its an inground pool
 Reply

A  Answered on 5/28/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. Yes, it will run once it's connected to your suction port with the pump running. 
 Reply


?     Asked on 5/26/2018 by Joanna

Will this work on inground pool (18x36) with vinyl liner?
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Joanna. Yes, it can. However, it only comes with 32 feet of hose. If your vacuum port is located in the center of your pool that will be sufficient. 
 Reply


?     Asked on 5/22/2018 by Tina

Will it work on a above-ground rectangular pool
 Reply

A  Answered on 5/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Tina. Yes, this unit will work in a rectangular above ground pool.  
 Reply


?     Asked on 5/19/2018 by Tina

Does it work with the jacuzzi pump filter system
 Reply

A  Answered on 5/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Tina. Yes, it will if the system is larger enough. 
 Reply


?     Asked on 5/19/2018 by Christopher LaRue

How long does it take to clean a 15 by 30 foot pool?
 Reply

A  Answered on 5/19/2018 by InyoPools Product Specialist Patrick P.

It really depends on how dirty the pool is, but I would say for a pool that is not too dirty it would take about 3 hours.
 Reply


?     Asked on 5/18/2018 by C Emmons

What horsepower of pump is required for this cleaner to work effectively? I have an above ground 27' round pool.
 Reply

A  Answered on 5/19/2018 by InyoPools Product Specialist Lennox H.

Hi, C Emmons. A 1.5 hp pump or higher is required to operate this filter. You must also have a large enough filter to accommodate the pump.  
 Reply


?     Asked on 5/18/2018 by

What works best to clean/vacuum a hot tub?
 Reply

A  Answered on 5/19/2018 by InyoPools Product Specialist Lennox H.

Hi. This unit will not work in a hot tub. I would recommend a Battery Powered Handheld Vacuum.
 Reply


?     Asked on 5/18/2018 by Dennis

I assume it cleans bottom of pool too
 Reply

A  Answered on 5/18/2018 by InyoPools Product Specialist Patrick P.

Hi Dennis, Yes it cleans both the walls and the bottom of the pool.
 Reply


?     Asked on 5/18/2018 by LARRY TAYLOR

Will it work with the solar cover on?
 Reply

A  Answered on 5/18/2018 by InyoPools Product Specialist Patrick P.

Hi Larry, Yes this pool cleaner will work with the solar cover on.
 Reply


?     Asked on 6/14/2017 by Cindy Spray

Also, where does the dirt go?
 Reply

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

Cindy, The cleaner would connect to your skimmer. The dirt would go through your pump/filter system. 
 Reply


?     Asked on 6/14/2017 by

Do you need a pole to attach to it so you can clean your pool while outside of it? (Like a telescopic pole for a leaf net) And if so, will a regular leaf net pole attach to this?
 Reply

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

This is an automatic suction side pool cleaner. You do not need to connect it to a pole. The cleaner comes with the necessary hoses. 
 Reply


?     Asked on 6/13/2017 by

will this work on a 2hp motor
 Reply

A  Answered on 6/15/2017 by InyoPools Product Specialist Lennox H.

Hi. It will but you may need to adjust the water flow to the suction port that is being used to operate the cleaner.
 Reply


?     Asked on 5/14/2017 by

will this work on a intex above ground 15x20 foot pool? it is salt water pool with filter . ? thank you
 Reply

A  Answered on 5/15/2017 by InyoPools Product Specialist Lennox H.

Hi. This cleaner will not work in an Intex A/G pool.
 Reply


Top

Review Summary

 (Average 3.67  out of 5 stars)
3 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(0)