1. Home
  2. Pool Parts
  3. Filter Parts
  4. Above Ground Pool Sand Filter- Splash, Pooline, Doheny's
  5. PL0771

$9.29

Qty:
 ADD TO CART

By PureLine

Details

Top

Part # PL0771

Manufacturer Code 88906005

Alternate Part #'s 88906005

Product Description

Replacement Sand Filter Valve Sight Glass & O-ring used on Sand Filters By Blue Wave SandMan, Bridging China BT Series, Doheny's, Splash, Pooline & Reliant.

This Valve Sight Glass & O-ring is Commonly Used in the following Sand Filters....

This Valve Sight Glass & O-ring is Commonly Used in Sand Filters with the following Model #'s....

Top
Ask A Question

?     Asked on 6/1/2019by Dan

I have a Doughboy media filter model number 0-1701-016. My filter is leaking where you backwash or pump to waste. I replaced the spring and seal and it still leaks. Is there a "plug" that I can screw onto that to stop the leaking? Part number? Thank you!

 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Dan. I'm not aware of a threaded plug that you can use. However, a Winter Plug can be used.
 Reply

  • Commented on 6/1/2019 by Product Owner

    What size winter plug?
     Reply

    • Commented on 6/8/2019 by InyoPools Product Specialist Lennox H.

      Daniel, Please provide the ID of the fitting. 
       Reply


?     Asked on 7/13/2019by Thomas Fallon

do you carry a sightglass with washer for the Hayward sp 740 de?
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Hector F.

Yes, we do. That part number will be 4700-12. 
 Reply


?     Asked on 5/20/2020by Kent Irish

Do you have a sight glass/valve for Pentair Tagelus TA60D sand filter - 2012
 Reply

A  Answered on 5/20/2020 by InyoPools Product Specialist Patrick P.

Here is the Sight Glass for Tagelus TA60D and here is the Sight Glass O-Ring for Tagelus TA60D
 Reply


?     Asked on 9/28/2020by Dan Nechanicky

Will this part fit Pentair Sand Dollar Top Mount Filter Model SD60 (Model 145322) ?
 Reply

A  Answered on 12/16/2020 by InyoPools Product Specialist Hector F.

Hi Dan, this will not likely fit your current multiport valve. Could you send us a few photos of your valve or provide the model number? If you provide images we will need a complete image of the valve and another looking down onto it. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 4/28/2021by Adam Branson

i need a sight glass for a sand dollar 80 P/N145386 please help thanks
 Reply

A  Answered on 4/30/2021 by InyoPools Product Specialist Patrick P.

Hi Adam, You will require this Sand Dollar Pool Filter Sight Glass and not the Sight Glass listed on this page.
 Reply



Read all Q&A’s
Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Had cracked sand filter valve sight glass

Written on 7/15/2023 by Guest

Exactly what I needed for a replacement to make repair. Thank you for your promptness

Were these instructions helpful? 
 

Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
Be the first to review this product.
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review