Part # PL7714
Part # PL7714
Warranty 1 Year
Crystal Pure Salt System by PureLine
The PureLine Crystal Pure Salt System makes the process of chlorinating the pool a breeze for you. When your pump runs, you will be producing chlorine, ensuring a steady dose into your pool water. The more consistent your chlorine levels are in your pool, the fewer chemicals you will use overall. Free yourself and your pool guests from the itchy, dry feeling of regular chlorine. With a salt water chlorine generator, the water feels smooth and won't leave a white residue on your skin. The Crystal Pure generator cell easily plumbs in-line and has quick disconnect unions for easy access.
Crystal Pure Optional Add-On Accessory Package
The Crystal Pure Optional Add-On Accessory Package includes several convenient tools for your swimming pool salt system. The package includes a Salt Cell Cleaning Stand, Salt Test Strips, and a Dummy Cell. The Cleaning Stand simplifies cell cleaning and eliminates having to soak the cell in a bucket of muriatic acid solution. Salt Test Strips are used to accurately measure the salt level in your pool. The dummy cell is used during cell cleaning, winter, and spring startup.
Optional Add-On Accessories
This cleaning stand simplifies cell cleaning and eliminates having to soak the cell in a bucket of muriatic acid solution. This Cleaning stand is used for PureLine Crystal Pure salt cells. You should clean your salt cell every 2 months to avoid calcium build up on your salt cell. By cleaning your salt cell regularly you will prolong the life of the cell. Also if you get too much calcium build up on the salt cell then the system will stop producing chlorine, regular cleanings ensure that your salt system will not stop producing chlorine.
Order Your Salt Cell Cleaning Stand
Salt Test Strips are used to accurately measure the salt level in your pool. The Crystal Pure Salt System does measure and give salt readout levels on the power supply however it is nice to have salt test strips upon startup of your Salt System. During startup up you will use your test strips to make sure that you add the correct amount of salt to your pool, it is also good to be able to compare the salt readings on the power supply to those of the salt test strips to make sure the system is giving accurate salt readings.
This straight pipe holder also called a dummy cell is used for several scenarios which we have listed below.
Winter: It is suggested that in areas of the country that you close your pool for the winter that you replace your normal cell with this dummy cell, the reason being is that the standard cell is expensive and by removing the standard cell you will prolong the cell's life.
Cell Cleaning: When you remove your normal cell for cleaning it is nice to have the dummy cell as you can replace the normal cell with the dummy cell so you continue to filter your pool while you clean your cell.
Spring Start-Up: The dummy cell is great to use during spring start up as quite often the pool can be quite dirty and you don't want large dirt and debris to get lodged in your standard salt cell.
Order Your Dummy Cell
Regarding the Crystal Pure Cell length, the photo on your produce page shows the length as 13 3/8. Measuring mine I get 12 1/4. Is the produce page wrong or am I measuring wrong?
I remeasured mine with my wife as a witness and still am getting 12 3/8. I also get 12 3/8 when I measure the dummy cell that I purchased from Inyo. I have attached a photo of my cell measurement.
Hi Richard, I personally went out to the warehouse and measured and you are correct this cell does measure 12-1/4" without the unions. I do apologize for the confusion!
We are talking about Pureline PN PL7714 correct. I measured again and I am still getting 12 3/8. I also have the dummy cell and it also measuring 12 3/8. I have attached a picture. Thanks Rich Lapointe
What is the NEMA classification of the controlpanel enclosure?
This is a Nema 1 Enclosure.
So, since the NEC classifies a pool pump and filter room as a Corrosive Environment (NEMA 4X) where do you suggest we locate your control panel?
Hi, Joe. We do not have a Nema 4X box, you will have to purchase one that will be able to accommodate the controller of this system.
If possible we would suggest placing the control box outside of the equipment room. If that is not possible then we would suggest placing as far away from any items that dispense chemicals.