$1,038.99
By PureLine
Part # PL7772
Warranty 2 Year
Pureline Crystal Pure Max Salt System
The Crystal Pure Max Salt System converts ordinary salt water to chlorine eliminating the need to purchase and handle chlorine. The chlorine which is produced is softer than traditional chlorine meaning a more enjoyable swimming experience for you and your family.
One of the top features of the Crystal Pure Max is its built-in salt meter which provides very accurate salt readings. Other salt systems base their salt readings off of temperature variations which can be inaccurate and can cause false system shut-offs.
Features
Note: The Crystal Pure Max does Not integrate with automation systems like Pentair® Intellitouch, Pentair® Easy Touch, Jandy® AquaLink, Hayward® AquaLogic and Hayward® ProLogic
Specifications
Simple Solution
The Crystal Pure Max produces up to 3.1 pounds of chlorine per day. When the pump runs, chlorine is produced. To adjust your chlorine level, tap a button. When impurities are sanitized, chlorine reverts back to salt and the cycle continues.
Advantages
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Does this use the same type of salt cell as the other crystal pure systems?
Reply
No this uses as a different salt cell, here you may view the Crytal Pure Max 60,000 Gallon Replacement Salt Cell
Reply
What is the difference between this and the PL7704?
Reply
Hi John, the main difference is that the Crystal Pure Max PL7772 uses an in-line salt meter to test and report your salt levels where the PL7704 uses temperature variations to estimate salt levels. Because of the salt meter on the PL7772, you get much more accurate salt readings then the PL7704. Inaccurate salt readings can lead to the system incorrectly shutting down because the system thinks your salt level is too high or too low when in actuality it is not.
Reply
I have purchased this unit, but I am confused on the wiring. It states in the instructions "PL71 can be used in 115v/230v, and convert the automatically". Does this mean no wiring configurations need to be changed depending on whether you are wiring to 230 or 115?
Reply
Hi JR, You will change the voltage on the system by changing the internal jumpers. The jumpers come pre-set for 230V operation and if you want to use your system on 115V then you will need to change the jumpers as shown here Jumper Location on Crystal Pure Max for 115V & 230V Operation. We are sorry that this is not clear in the installation manual and we are in the process of updating the manual after you have brought this to our attention. Thank you!
Reply
Please disregard the last comment as this power supply does not use jumpers for changing the voltage. The power supply will automatically detect if 115V or 230V is being applied and adjust accordingly so there is nothing you need to do on your end.
Reply
There is also this Guide and Video on How to Wire a Crystal Pure Salt System on 115V which you may find helpful.
Reply
More than 8 hrs
saw
1. order salt system from INYOPOOLS
2. bought 1000 pounds of pool salt from home depot.
3. get some salt test strips
4. start dissolving salt (I have a 38,000-gallon pool) so I started with 10 40pound bags of salt) making sure the salt was stirred around and dissolved. Run the pool pump to circulate, wait 24 hours and use the salt strips, and test for salt level, repeat until the salt level is 3200-3400ppm.
5. salt water chlorinator and power supply arrives from INYOPOOLS
6. Turn off power to pool pump, in my case I am running a 240v pump, so I wire two of the power supply to the two hot load leads leading to the pump and the green to ground.
7. bond wire from the electrical supply to ground.
8. Turn off all valves in the pool, and then measure 14 inches that need to be cut out from the pipe return to the pool. Use PVC glue to mount the correct fittings. Let it cure for at least 2 hours before turning on pump.
9.connect the cable from the chlorinator to the power supply.
10. open pool valves
11. turn on power to pump and chlorinator.
