Is it possible to replace the light housing while using the existing electric cable?
Reply
You cannot use your existing light cable. You will need to pull the new cord through the conduit on the new light.
Reply
How long should the light fixture last. My salt water pool was completed the summer of 2012 and rusted out at the end of the summer last season.
Reply
Hi, These unit does not have life expectancy. If you have a salt water pool you should have a Zinc Anode to prevent rusting.
Reply
I need to replace my Wet-Niche Type pool light. Fixture Housing Model SP 583-L. The light fits a fixture housing model SP-600 SP-607. the fixture says 500 watts, 120 volts R-40. There is another number on the pool light fixture that I cannot read clearly. It looks like Number P9?534. Is the Pool Astrolite listed above the correct replacement? My cord is approximately 15 ' long.
Reply
Hi Chuck, The Astrolite can be used in the SP-600 SP-607 niche.
Reply
Hello, I need to replace whole pool light fixture. Our old light fixture shattered to the water so I don't know the fixture or niche model. I only know it is 120V. How can I select the correct model? I think the fixture was kind of copper, but I am not sure. I don't know if it is a good idea to have the copper exposed to water chemicals. Please advise with your recommendation. Thank you.
Reply
Hi George, Without the model of the niche or model of the current fixture the only other way is to send us photos of the fixture along with measurements.
Reply
I have a Hayward Pool Product In-Ground light fixture ... Wet-Niche Type No. S-154095 / Fix Mod. SP-583-L 500 Watts 120 Volts Bulb Type R-40 and am looking for a replacement fixture.....Needs to have a 100 FT cord.
What would be a direct replacement and or an alternative?
Reply
Hi, Wayne. You will need p/n SP0583L100, the Astrolite 120 Volt, 500 Watt, 100 Ft Plastic Face Rim.
Reply
Can I convert this to LED bulb and also is there a clear replacement faceplate available for purchase?
Reply
Blake, We offer a 120 V, 35 W, replacement LED bulb for the Astrolite. The only faceplates available are in plastic or stainless steel.
Reply
Hi,
Looks like this will replace my SP-583-L 500W 120V so if that is the right replacement what kind of zinc anode do I need to use since I have salt water pool? And should I get one for the shallow end light as well--we just converted to salt.
Thanks,
Chris
Reply
Hi, Chris. You do not need a zinc anode since this fixture has a plastic face ring.
Reply