will this work with a 1.5 hp motor if not what size do i need to get
Reply
Brenda, I would recommend the 24" Sand Filter Top Mount. It would offer you better filtration flow and less backwashing over time. This filter does also come with a 1-1/2" port multiport valve.
Reply
I have a hayward pump power flo lx, attached to a game model 4511 sand filter. my question is can I use this filter with the Hayward pump and will this filter have same attachments?
Reply
Hi, You will need a 1 1/2" x 3' Filter Connection Hose and a Combo Hose Adapter (spx1091z7) to connect your pump to the 16" Pool Sand Filter Top Mount (BC3040).
Reply
i would like to know if this is big enough to keep a 21ft.x 4ft.above ground pool crystal clear i have proline pump serial # spoo613819 model# sp20-2n11cd and would the hoses i have adapt onto it.
Reply
Hi Tony, The 16" Pool Sand Filter Top Mount would be to small for your pool and pump would recommend the 24" Sand Filter Top Mount, it will provide better water flow and fewer backwashings.
Reply
What size sand filter would i need for a 24 foot by 48 inch pool above ground?
Reply
HI Chris, The 16" Pool Sand Filter Top Mount (BC3040) will be a good size filter if you have a 3/4 Hp Pump. If you have a larger size pump then you will need a bigger size filter also.
Reply
Hi
I would like to double check my reasoning. I need to replace a Hayward S160T filter which split and this filter seems a good replacement. I have a 14,000 gallon pool with a 1 hp Hayward SP2607X10 pump. I estimate 60 feet of head which gives me a flow rate of 27 gpm per Hayward's table, which is well within the flow rate of the filter.
Thank you
Reply
Hi Nicholas, Based off of the info provided, this filter will be a good replacement.
Reply
will this filter be big enough for a 24' pool
Reply
If you have a 3/4 HP pump then this 16" sand filter would be fine for you, if you have a larger HP pump then I would suggest the 18" Hayward S180T Sand Filter.
Reply
Is this 16 in big enough for 18x52 pool
Reply
If you have a 3/4 HP pump then this 16" sand filter would be fine for you, if you have a larger HP pump then I would suggest the 18" Hayward S180T Sand Filter.
Reply
where do I position the plastic tub with a little object on the end attached to the stem??
Reply
Hello Richard to better assist you can you provide us with a picture of what you are referring to by "plastic tub" and "stem".
Reply
I purchased a pool pump PL1502 from inyopools. 1.5hp for a above ground pool. Can I use the 16inch sand filter with it?
Reply
Hi, Sue. A 1.5 HP pump is a bit oversized for a 16" sand filter. I would recommend an 18" or higher.
Reply
What are the options on the top? Does it have a waste option, winter, rinse, backwash,etc? Waste especially?
Reply
Hello Jess- The valve on top of the 16" Pool Sand Filter Top Mount - 73040 has the following options: Filter, Waste, Recirculate, backwash, and close.
Reply
Where can I find parts for Poolline filters
Reply
We do carry Pool Line Filter Parts. Please click this link here to View Parts for Pool Line Sand Filters
Reply
