I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
I have an InTex above ground pool, with a Hayward Sand Filter (Model# VL40T32; Serial# 2112111100567301). The pump started leaking, will this kit work on my filter?
Reply
Hi, The Hayward Pump Shaft Seal Kit (VLX4008) will be the correct kit for that pump.
Reply
Does this fit RS 1500
Reply
Dennis, The Gokit12 Tune Up Kit Power-Flo 1500 Series will not fit the RS1500. The correct seal kit is Gokit2 Tune Up Kit Hayward Super II.
Reply
Does this kit fit HAYWARD perflex EC40 flow pump?
Reply
The Hayward EC40 is a DE filter, this kit is for the pump that feeds the filter. Do you know the make and model of your pump's housing?
Reply
Will this kit fit a Swimpro Voyager/Matrix pump? I need to replace the motor and want to get the right tune up kit to go with it.
Reply
No this does not fit the Voyager/Matrix pump, the Matrix does not have a Tune Up Kit but we would suggest replacing your Hayward Matrix Shaft Seal.
Reply
will this kit work on an sp1520 Hayward pump I have water leaking from the housing and I am guessing it is a gasket
Reply
Yes, the GOKIT12 Tune Up Kit Power-Flo 1500 Series will work with you sp1520 model pump. The kit contains multiple o-rings to fit all of the 1500 series pumps.
Reply
What is the correct tune up kit for motor # 7-F56AA13A04-25
MODEL # SPX3215X20Z1PE
Reply
We do not have a tune up kit for the Hayward TriStar pump. When replacing the motor, I would recommend you replace the HAYWARD NORTHSTAR/TRISTAR SHAFT SEAL. You may also want to replace the Tri Star Housing O-ring and the Strainer Cover O-ring.
Reply
Will this kit work with a AO Smith
SP 1515z1bc?
Reply
Hi, Tonya. This tune up kit is specific to the Power-Flo 1500 series pump. The SP1515Z1BC is the motor's p/n which can be used on several pump including the Power Flo pump.
Reply
Will this kit work with a AO Smith
SP 1515z1bc?
Reply
Hi, Tonya. The SP1515Z1BC motor can be used on several pumps including the Power-Flo 1500 Series pump. This kit is specific the pump model not the motor, so to confirm I will need the pump housing model.
Reply
I have SP1515-Z-1-ESC will this kit work for my pump?
Reply
HI Chad, We would need to know the make and model of your pump. It should be a Power Flo LX or Power Flo Matrix. Could you email us which pump you have.
Reply
How do I determine whether I have a 1500 or 1700 series Hayward pump?
Reply
Hi, Joe. The design of the Pump Housing will determine if you have the 1500 Series or 1700 Series.
Reply
I have the Pureline 1.5 hp above ground pool pump will this tune up kit work on it p
Reply
Hi, Guest. Unfortunately, this kit will not compatible with the PL1502 pump. The seals for that pump can be found using the Above Ground Pool Pump Parts Diagram.
Reply
I have a Hayward Model 1520x152wc wet end for my 1994 coleman spa. which is the correct repair/rebuild kit for this model. Thanks Jeff
Reply
Hi Jeffrey for that model we do not have a tune-up kit Hayward Power-Flo LX 1580, 1520UN, 1680 parts listing.
Reply
will the GOKIT - 12 have the parts I need to shaft leak along with gasket for mounting outer and inter wet end pump half's Thanks Jeff B.
Reply
Jeffrey, This tune up kit - GOKIT12 does not include all of the parts for your model pump. You will need to purchase the parts separately, which are all listed on the Hayward Power-Flo LX1580, 1520UN, 1680 Parts Diagram.
Reply
I have a Hayward power Flo matrix 1hp pump that's leaking water from the bottom. My model # is Sp1510z1xehc. What kit can i buy that will be compabitale?
Thanks
I have a vacuum hose attachment that sits on top of the skimmer. I have low suction at that point, even before I connect the vacuum to it. Would this kit give me greater suction? Thanks.
It could help with the suction if the pump lid o-ring is the issue. An air leak from the lid could decrease suction. I'd also look at the impeller and make sure it is not clogged or damaged.
Reply
What impeller would it take based on the motor specs?
Reply
The impeller would be part number 5111-07H.
Reply
Hayward Power Flo 1HP motor. Need tune up kit leaking at shaft seal
Reply
Hello Stan. The GOKIT12 contains the correct tune-up parts for the Hayward Power Flo LX Series 1/2 HP - 2 HP single and dual-speed models, the Hayward Power Flo UN Series 1/2 HP - 2 HP single and dual-speed models, the Hayward Power Flo 1500 Series 1/2 HP - 2 HP single and dual-speed models. Please note: the Hayward Power Flo II and Hayward Power Flo 1700 Series models use GOKIT13. Tune Up Kit Hayward Power Flo 1700 Series - GOKIT13
Reply
hi , i am going to replace a 7-f56aa13a04-25 pump. i see this is a century pump and the kit seems compatible but mentions hayward only. will this work? also should i replace impeller or any other parts while Im at it? thx
Reply
Hello Eric. The part number provided, 7-F56AA13A04-25, cross-references to the Century Motors model B2859 motor. A Tune-Up Kit contains parts specific to the manufacturer/model of the PUMP and not the motor. The GOKIT12 is specific to the Hayward Power-Flo Pump 1500 Series. Pump manufacturer/model information is located on the pump body, generally the wet end, If your pump is the Hayward Power Flo 1500 Series, the GOKIT12 is compatible. In most cases, it is not necessary to replace the pump impeller unless a visual inspection reveals damage.
Reply
would this fit this type
Hello Jonathan. The Tune Up Kit Hayward PowerFlo Matrix Pump - GOKIT74 is the compatible GOKIT for the Hayward Power-Flo Matrix 1590 Series Pump model SP15932S. Attached please find the Hayward PowerFlo Matrix Pump exploded parts diagram for reference.
Reply
Tune -up kit for Hayward Pump 1500 Power Flo Matrix. Do you supply this kit and if so, price?
Reply
