Is it possible to replace the light housing while using the existing electric cable?
Reply
You cannot use your existing light cable. You will need to pull the new cord through the conduit on the new light.
Reply
How do you synchronize two or more Color Logic lights?
Reply
The Color Logics lights will synchronize when they are wired to the same switch. To synchronize the circuit boards inside the lights, you need to turn the switch off for at least 10 and no more than 14 seconds. When you turn the switch back on, the lights should be on the same color rotation.
Reply
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
Reply
The LED lights are designed to move to the next programmed setting each time you turn the switch on and off. This will toggle through the different color settings and shows.
Reply
Does the transformer come with the 12v ColorLogic light?
Reply
No, The 12V ColorLogic doesn't come with a transformer. The 12v transformer needs to be purchased separately
Reply
What is the the replacement for this item since this one is no longer available?
Reply
Hi, Gil. You can use the Universal ColorLogic Pool Light 12V 100' Cord - LPCUS11100 as a replacement.
Reply
