Is it possible to replace the light housing while using the existing electric cable?
Reply
You cannot use your existing light cable. You will need to pull the new cord through the conduit on the new light.
Reply
How do you synchronize two or more Color Logic lights?
Reply
The Color Logics lights will synchronize when they are wired to the same switch. To synchronize the circuit boards inside the lights, you need to turn the switch off for at least 10 and no more than 14 seconds. When you turn the switch back on, the lights should be on the same color rotation.
Reply
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
How do I get the light out of the pool, or how do I detach cord ?
Do I take cover off of light , after puling it out of the pool ?
Does the cord come out from the housing or from the light?
Reply
Frank, This How To Guide may offer some help.
Reply
I have the hayward fixture SP0600U or 607U, 604c, or 609C.
Shows replacement to be SP0525Sled100.
although, it shows that its a 50watt, 120 V
Reply
Frank, If you have the SP0600/607U niche, you can install the Hayward Colorlogic Pool Lights.
Reply
I need to replace this light but it is no longer available. What else can I replace it with? Also, I have a salt water pool and noticed that this part says fresh water only. :( It's been in our pool 10 years.
Reply
Hi, Arryn. The ColorLogic 4.0 - SP0527SLED100 would be the current replacement for this fixture. A saltwater pool is also considered a freshwater pool.
Reply
Hello I currently have 2 color logic SP0525SLED100! I need to replace only 1 of them due to moisture inside the light and tripping my breaker every time I turn them on. My question is since my model is no longer available and you say that the SP0527SLED100 is a replacement for it ... will installing just the 1 new light series work together with my 2nd light even though they will be 2 different brands? Want to make sure they turn on and both lights match and are in sequence together.
Reply
We apologize for the inconvenience, however, we were unable to obtain an answer to your question from the manufacturer. We are unable to confirm this information. We suggest contacting the manufacturer directly.
Reply
Did anyone ever get the answer the question regarding the old model hayward colorlogic sp0525sled100? I have total of 4 in my pool and on of them is out and tripping my breaker need to replace but want to be sure the other 3 lights will work and with which replacement model?
Reply
