How do I get an operating manual for the Aqualink RS6 Pool Only/Spa Only System. I have lost my original. I need a replacement.
Reply
Hi Larry. Here are pdf versions of the Aqualink RS owner's and installation manuals. They are not specific to the RS6 but the only ones I currently see available. Best of luck.
Reply
i need owner munal of aqualink rs6 to find out clearing of old program
Reply
Hello, Here is the link to the Jandy Controls All Button Owners Manual for the RS Series. It does contain detailed instructions on how to reprogram the system information.
Reply
How do I turn the heater to the pool on?
Reply
Hi Chadwick, You can find instructions in the Jandy Controls All Button Owners Manual to turn on pool heater.
Reply
I have an RS6 that use to retain the date and time when ever their was a short time power outage. It has quit doing that and I cant find a secondary power source behind the front cover. Hope your able to tell me where it is. Thanks
Reply
Hi. There is not a secondary power source other than the 9-V Battery that is located behind the small door on the right side of the Power Center panel.
Reply
my waterfall continues to operate inspite of thesgreen showing that its off
Reply
Hi, Kiriam. Confirm that the Waterfall pump is actually still running. If it is, then there is an issue with the Aux Relay that controls that pump.
Reply
All the buttons on my control panel work except the Slide. The pool guy said that he can turn it on manually. Everything seems to work except the button. What do you think.
Reply
C Burdge. The issue could be the PPD chip or the Controller PCB. This issue will have to troubleshoot on site to determine the exact cause. .
Reply
How do I undo a lockout of the vacuum?
Reply
Hi, Phyllis. Page 12 of the Jandy Controls All Button Owners Manual provides you with instructions.
Reply
Can i run the hot tub while freeze protection is on?
Reply
Activating the spa during freezing conditions will override freeze protection. This means that if you are using your spa when freezing conditions exist, freeze protection will not circulate water to non-spa related equipment that you may have freeze protected (for example, pool cleaner, booster pump) and the potential exists for equipment damage.
Reply
