What are the port measurements (from the ground) for the Pentair Clean and Clear Plus cartridge filter?
Reply
The measurements for the Pentair Clean and Clear Plus cartridge filter are as follows: top port is 15.5" on center from the ground and the bottom port is 8" on center from the ground.
Reply
Will this Product (Pentair Multiport 2 Inch Hi-Flow DE Filter Valve 261142) fit the above filter?
Reply
Filter model # 160340, does not require a multiport valve. The valves are only required for sand or DE filter units, not needed for cartridge filters.
Reply
What type pump should be used. Pool size 16' x 32' - 3.5' to 7.7' deep
Reply
Hi, You will need to calculate the total feet of head of your pool. You can watch our How To: Size A Pool Pump to find out how to calculate the total feet of head. Once you have that info you can provide us with that figure then we can recommend a pump that can be used with this filter.
Reply
Can I buy the lid only for this filter 160340
Reply
Hi, The Tank Lid Assy., 320 Sq Ft (170024) is the correct lid for this model filter.
Reply
what size filter should be for a zero entry pool 70 long and deep end is 7 foot it is 30 feet wide I have a ccp420 and my filters need cleaning every-week is there any better cartilages
Reply
Does this filter still include all 4 cartridge filters with purchase?
Reply
Yes, these include all four cartridges with the purchase however we are currently out of stock on these for the remainder of the 2019 pool season.
Reply
what does the warranty start, right after the purchase or installation? my installation will be a few months later. should delay the purchase until I need?
Reply
Hi Young, the warranty starts from the date of purchase. Please see this Pentair warranty card for further warranty details.
Reply
