This model is "without chord".....so what is the chord for? How do I know if I need one or not?
Reply
Hello David - Since this heater does not come with a cord it will need to be hard wired. Some models have a cord with a 3-prong plug. These models can be plugged into a standard 110v outlet.
Reply
The house gas line is 1.25" and the heater has a 3/4" hook up. My question: Will this cause low gas pressure at the heater? Distance from main gas line to heater is less than 10'
Reply
Hi Tommy, According to the MasterTemp High-Performance Heater Owners Manual 1/2" pipe is require so it can cause gas pressure issues.
Reply
Hello, my pool is being built with 2 inch plumbing. Would I be able to use this heater?
Thank you
Reply
Does this unit need a pump? I had a propane chofu heater that was plumbed directly into my tub. Is that how this works, or do you need a pump?
Reply
Good afternoon, this unit will require a pump and filter system to allow the water to be pushed through the heater.
Reply
my current pool spa heater is mini max 400k.
feburary freeze took my heater away, want to replace with heater that will heat spa not pool.
will this replace the minimax 400 natural gas and is it instock?
Reply
Hello Butch. The Pentair Pool Products MasterTemp 125K BTU NG Heater model EC-462024 is a compatible replacement for the MiniMax 400K BTU NG Heater. Currently, the Pentair EC-462024 is in stock. Please note; the reduction in BTU capacity will result in increased heating times.
Reply
