What size diving board can I use on my pool?
Reply
Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.
Reply
I've had to replace the stand twice. Is there a heavier duty replacement stand that uses the same bolt pattern? I take the board and stand off each winter as one unit. The stand always cracks between the back two bolt holes. Could I be bolting it down wrong?
Reply
There is no other Spring Stand which you could use as a replacement. One possibility would be to go with the SR Smith Cantilever Stand and Board, this is a much sturdier and rugged board but you would get less bounce. The board and base combination would not use the same bolt pattern so you would need to purchase the S.R. Smith Epoxy Kit, this would require that you cut your existing bolts flush with the deck. You would then drill 4 holes in your deck and apply epoxy to the 4 bolts which come in the kit; you would then stick these 4 bolts into the deck so you will now have 4 new bolts sticking up out of your deck which can accommodate the new Cantilever stand. Thanks for the great question!
Reply
I have a need for a diving board with a higher weight capacity than 250 pounds. Is there one available that can handle a person around 300 pounds?
Reply
The S.R. Smith U-Frame coupled with the Frontier IV Diving Board has a weight capacity of 400 ponds.
Reply
Is the 3 bolt pattern for the Frontier the same as with the Durospring? What is the difference between the boards?
Reply
Karen, The pattern is not the same as they are made by 2 different manufacturers. The DuroSpring is Interfab's version of the SR Smith diving board.
Reply
I have a 6 foot deep end pool and my pool is a 16x32 oval shape unground pool. I’m looking for a board my kids can jump off of with no spring .
Reply
Hi, Scotty. This Diving System will need your needs looking for a no spring system. However, to make sure that this unit will meet your pools needs, you will need to complete the Water Diving Envelope if you haven't.
Reply
