?     Asked on 9/21/2006by Guest

Does this come with the filter cartridge and gauges?
 Reply

A  Answered on 9/21/2006 by InyoPools Product Specialist Patrick P.

This filter comes direct from the manufacturer and includes the cartridge and gauges.
 Reply


?     Asked on 11/1/2014by Inyo Visitor

Is this the tank and filter cartridge sold as one?
 Reply

A  Answered on 11/3/2014 by InyoPools Product Specialist Robert M.

The PLM150 that you are looking at is the tank and filter cartridge.
 Reply


?     Asked on 6/2/2015by wes

What is the air pressure under normal operation for 16,000 gallon pool
 Reply

A  Answered on 6/2/2015 by InyoPools Product Specialist Dennis R.

Wes,  Normally, with a newly cleaner or backwashed filter, the air pressure will be between 10-15 psi.
 Reply


?     Asked on 7/20/2015by Tom

I need the bottom of the tank for a PLM 150 filter system. One I have is cracked on bottom section. How much and is it available?
 Reply

A  Answered on 7/20/2015 by InyoPools Product Specialist Dennis R.

Hi Tom. Yes, we have the Sta-Rite PLM150 Tank Shell Lower Half for $338.99 and our records show that it is in stock.
 Reply


?     Asked on 5/6/2016by Inyo Visitor

I bought a brand new 27002-150 Sta-Rite pool filter for my pool and did not use it. We have sold our house and bought another house with a pool. I would like to purchase a Sta-Rite Filter housing for this filter to fit for our new pool and want to make sure I am ordering the right housing. Thank You
 Reply

A  Answered on 5/6/2016 by InyoPools Product Specialist Alan M.

Hello, The PLM Series Cartridge Filter 150 Sq. Ft. uses the Sta-Rite Modular Media PLM150 150 Sq Ft Replacement Cartridge (27002-0150S). The cartridge you listed is the replacement cartridge for this complete filter system.
 Reply


?     Asked on 9/2/2016by fletcher shepard

What is the correct body o-ring for model plm150 sta rite filter?
 Reply

A  Answered on 9/2/2016 by InyoPools Product Specialist Stacey M.

Hello Fletcher, depending on the year of the model there are 2 types. First is 3/97 to current body oring, then there is pre 3/97 body oring.
 Reply


?     Asked on 6/14/2017by Inyo Visitor

Is this filter adequate for a 15,000 to 20,000 gal pool? Thank you.
 Reply

A  Answered on 8/3/2017 by InyoPools Product Specialist Alex V.

Hello, Yes, this is large enough for a 15-20,000k gallon pool. 
 Reply


?     Asked on 6/7/2018by Tim

Deciding between PLM 150 and Posi Clear 150 filter for 24 ft round above ground pool, which is best and why? Like the capability to rinse filer without removing on the PLM, and the shorter stance but how much flow is lost due to bottom entry?
 Reply

A  Answered on 6/7/2018 by InyoPools Product Specialist Hector F.

So both of these filters have the same maximum gallons per minute rating and both can filter microns down to 20. With that said it is about preference at this point. If it were myself due to the height of the Posi clear, maintenance would be easier as far as cartridge removal is concerned. I would go with the Posi Clear. 
 Reply