I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
I want to order the Sta-rite multiport valve WC112-148. Is it for a 1 1/2" tubing?
Reply
Hello Dennis - The WC112-148 is no longer available. It has been replaced by the Pentair 261186 (4600-1186). This valve is designed for 1-1/2" pvc piping.
Reply
Will this valve work on my sta-rite sand filter, T180 WF-H
Reply
Hi Michael when you order this valve you will receive the 261186 valve as the WC112-148 was discontinued and replaced by the 261186. The 261186 valve will work on your T180 WF-H Sta-Rite Waterford filter however the ports on the valve are not in the exact same location so some re-plumbing is required.
Reply
Piggybacking off Michael's question below do you just need male adapters if your hoses have female ends?
Reply
Kevin, Yes you'll need the Sta-Rite Male Adapter 1-1/2 MPT (11201-0002) and S.S. Hose Clamp 1 5/16 To 2in (276-28) to attach the hoses to the valve.
Reply
I'm looking for a replacement valve and associated parts for an Aqua Tools Hi-Rate 300 lbs Sand Filter AT 3124.
Reply
Hi Terry, You can find the replacement valve and part for your Aqua Tool AT3124 Sand Filter via Aqua Tools Sand Parts Diagram.
Reply
I have a 200 lb. sand filter. Looking for replacement top valve. Model # T-210WF-H. Was installed in 2008. What can be used? Thanks!
Reply
The WC112-148 is the valve that was included with the T-210WF-H sand filter although this valve was discontinued by the manufacturer. The replacement for this valve is the Pentair 261186 (4600-1186) which has a slightly different port configuration meaning that you may have re-plumbing if you are using rigid PVC pipe.
Reply
Looking to replace the valve for a T210WF model the back wash connection is crack and filter is not working well do you hava a replacement for this valve.
Reply
Yes, that would be the correct valve for that filter model.
Reply
I have a 300 lbs Hi rate sand filter that needs the valve assembly. The model that I have is wc112147. Do you have something that fits?
Reply
What is your filter model and your plumbing size so I can find you a suitable replacement valve?
Reply
I have a T210WF Sta-Rite filter and I need a new label for the valve positioning. Mine is worn off and I can not read what each position on the filter is for anymore. Would you have this available without having to buy a new valve?
Reply
Hi, Steve. Unfortunately, the valve decal is not available. You will have to replace the Cover Assy - 77704-0104 or the complete valve.
Reply
Just ordered the wc112-148 (wc119-87) clamp assembly for this valve. Current valve has two clamps that screw together. Will this one fit or should I cancel the order?
Reply
As long as the valve matches your current filter model or exact valve model then it will be a compatible replacement.
Reply
I have sta-rite T-240BP-1 would the pentair 261186 be a good substitute?
Reply
What Spider Gasket Model No. does this valve take?
Reply
