Do I need to put silicone adhesive on the replacement Teflon washer used on the Hayward multiport filter valve?
Reply
No adhesive or silicone is needed when replacing the Non-metallic Bearing that goes under the handle on the Hayward Multiport Valve.
Reply
I need a gasket foe under the multi-port lever & a spring for Hayward s244t sand filter Model # 711 13.
Reply
Hi Lana, You can find all the parts for your valve via the Hayward Multiport Vari-Flow 1-1/2" SP-710X, SP-712, SP-711 1976-Current Parts.
Reply
How do you put this on under the valve handle?
Reply
Hello Mike - First, remove the 6-8 screws that hold the key,cover and handle assembly to the body of the valve. You will then need to compress the key,cover and handle assembly so that you can pop the pin out of the handle. You can pop the pin out by using a hammer and screwdriver. Once the pin is out you can disassemble the valve and replace the non-metallic bearing.
Reply
I need to replace the non-metallic bearing on my valve and I just read your explanation to Mike but I'm not understanding why I need to remove the screws before I depress the handle and tap the pin out. Do I remove the screws lift the entire assembly out of the body then depress the handle/spring to tap out the pin?
Reply
Hi, Gerry. It will be difficult to replace the Non-Metallic Bearing with the cover assembly still mounted to the valve body. Yes, you will have to remove the screws, lift the cover assembly out of the body, compress the handle/spring to tap out the pin.compress the handle/spring and tap out the pin in order to replace this bearing.
Reply
Will this bearing work on my Hayward SW256T? Thank you!
Reply
Hi, Janice. Yes, this Non-metallic Bearing - SPX0710Z16 will work with the valve used on the Hayward SW256T Filter.
Reply
I need to reassemble my entire top half of my multiport
here are the parts I need
spx710xf
spx710xz7
spx710z16
spx710xb plus metal plate
spx710z1a
the rest of the parts till the key and stem assembly
My handle snapped and my cover is cracked
How do I assemble all this after purchase and how much and I looking at I have a filter valve order page from hayward E-11
Any help would be great I can be reached at 909 632 1269 Mike Murangi
Reply
Hi, You will need the following P/N SPX0710XBA17, SPX0710XZ3, and SPX0710XD
Reply
Can I just remove the pin in the handle to access and replace the teflon washer? My Valve is SP710XR50. I would rather not have to remove the entire assemble and deal with the spring if it's not necessary.
Thanks!
Reply
You should be able to remove the pin and the handle and replace that bearing no problem.
Reply
Will this fit the SP0740DE mine snapped in half!
Thanks!
Reply
Hello. The Non Metallic Bearing SPX0710Z16 is compatible with the Hayward Multiport Valve model SP0740DE. Attached please find an exploded parts diagram for the Multiport Valve SP0740DE. Hayward Selecta-Flo Multiport Valve - SP740DE
Reply
Will this fit the SP0740DE mine snapped in half!
Thanks!
Reply
Hello. The Non Metallic Bearing SPX0710Z16 is compatible with the Hayward Multiport Valve model SP0740DE, Attached please find an exploded parts diagram for the Hayward Multiport Valve SP0740DE. Hayward Selecta-Flo Multiport Valve - SP740DE
Reply
