I need a shaft end bell for a sq1202 motor that takes a 6204-2rs bearing.
I haven't been able to find one anywhere
Can you help ?
Reply
Hi, The Sq. Flange Shaft End Bell will be the correct shaft end bell for the SQ1202 motor.
Reply
I bought a new pump motor that came with a frame size of 56J but I need a 46Y, will this one fit or if not do you carry that size frame?
Reply
Hi Emily. This shaft end bell is the correct one for a 48Y frame motor, however, it will not fit onto a 56J frame motor. You will have to return the motor and purchase the correct one.
Reply
Will this end bell fit a A.O. Smith 7-196336-20 motor. My end bell looks different, but is similar.
Reply
Hello, Yes you can replace this Bell end for that model motor. Please keep in mind that the replacement motor, the A.O. Smith 1 HP, 56Y Frame, Up-Rate Motor is always the better option depending on how many parts this motor needs replacing. The part has no warranty and once it has been installed (or attempted to be installed) it is not eligible for a return.
Reply
Do you sell just the motor seal for this or do I have to buy the whole assembly?
Reply
We usually do carry the seals and gaskets but those will depend on the model name or number of the front pump housing that the motor bolts to. If you can provide that to us or if you are not sure you can always send us images of the housing to upload@inyopools.com so we can try and identify the model for you.
Reply
Does this flange have the shaft seal and washer pressed in?
Does this come with the clip and screw to secure bearing into the cup as shown in picture?
Reply
Good day, the Shaft End Bell, Sq.flange (203) (saw-49) will just be the shaft no seals would be included in this part.
Reply
No, this is the end bell housing only. The Shaft seal will be determined by the pump/wet end the motor is mated to, Bearing clip & screw are not included. will need a 203 bearing
Reply
Do you carry the rubber and metal washer that gets pressed into the front of this flange? Do you carry the clip and screw to secure the bearing for this flange?
Reply
Hi, Kevin. Unfortunately, we do not carry those parts at this time.
Reply
I am replacing bearings and need the same rotary clip seal for the bell housing. Do you know a part number or sizinng for that for that?
Reply
need a square flange end bell with bearing retainer and screw for a Pentair superflo 1 1/2 hp pool pump motor.
can you help?
Reply
Hello clay, Do you have the model number of the motor, are you looking to replace the motor and seals?
Reply
