Can you just get the spider gasket for this Jacuzzi backwash valve?
Reply
On this valve the spider gasket is only sold glued into the diverter, so when the spider gasket goes bad you need to replace the entire diverter with the glued in spider gasket.
Reply
Do you know what part I need to replace if water is always leaking out of my waste port?
Reply
If you are leaking out of the drain port while on filter, the gasket on the key assembly (key #13) may be to blame. You can take a look at a breakdown of the valve here.
Reply
My valve is pouring water out of the backwash in filter mode, as well as leaking around filter handle at top. Do I need to replace the entire valve?
Reply
If the valve is leaking out of the valve, you will wan to inspect the spider gasket inside of the valve.
Reply
How is the key assembly orientated to the jacuzzi main body of the diverter valve? I thought I knew but on assembly the handle is not tight. What am I doing wrong?
Reply
Hi Jerry - Our guide with video on How to Replace a Spider Gasket on a Multiport Valve should help out quite a bit with showing the orientation of the key assembly. The guide is showing a Hayward valve but the orientation would be the same for a Jacuzzi valve.
Reply
Will this gasket fit
a 39263009 Jacuzzi valve
Reply
Stephen, Yes it willfit. Here is the parts page: http://www.inyopools.com/pool_parts_7_way_dial.aspx
Reply
Key Assembly with Gasket (39251509r000, 39068705R)
Will this fit a jacuzzi laser sand 160L
I have a filter leaking from the crank at the top
Reply
Hi Rick, Yes this Key Assembly with Spider Gasket will work on the Jacuzzi Laser 160L.
Reply
Will this part fit an Aquatools sand Filter, Model # PN AT11834? All the dimensions are correct. The backwash port is leaking when in the filter position. Thank you, Pat
Reply
Hi Pat, The Rotor W/ Gasket (14965-0028) is the correct part for the WC112 Series Valve for the Aqua Tools filter.
Reply
I need a spider gasket for model SS185. can this be purchased separate or do I have to purchase the whole assembly?
Reply
Hi Roberta, We will need to know the model number of the valve that you have in order to find out if the gasket is available separately.
Reply
I have a leak from the back flush . Was told the spider valve is worn down. Just want to make sure this is correct part. my model is
DV Assy 7 sop 1-1/2 npt
July 2002
Thanks for your help!
Reply
Hi Lynn, Yes, this is the correct part you will need to stop the valve from leaking. The Diverter Repair Kit Dv6/7 (39251509RKIT) is a beeter option than just replacing the Key Assembly with Gasket (39251509R000).
Reply
Will this work with a SFTM22 sand filter.
Reply
Hi, Jeff. Unfortunately, we're unable to confirm if the Carvin valve parts are interchangeable with the Jandy SFTM-MPV valve even though the parts looks to be similar. According to the info provided by Zodiac you will need the SFTM-MPV Rebuild Kit - R0492000.
Reply
How do i know if there are two parts numbers which one it is? For jacuzzi atl 250
Reply
Hi, Andre. If you're trying to confirm if this assembly is compatible with your valve, provide the valve model or order number.
Reply
Hello,
I have a slight water leak on top under the handle of a multi-port valve. Need rubber gaskets (o-rings and perhaps a spider gasket) for Multi-port valve JACUZZI DV ASSY 7-POS 1-1/2NPT, Model 39263009. Date 22Jun01 at LITTLE ROCK, AR USA.
Per my knowledge Jacuzzi no longer in that business. So the Q is: What model numbers or part numbers should I look for a replacement rubber parts? Two pictures are enclosed.
Thank you in advance.
Regards. Andrew.
Hi Andrew, Thank you for the details on your valve and the photos, those are quite helpful. You will require this Jacuzzi DVK7 Upper Valve Assembly Replacement Kit.
Reply
Will this fit an older Jacuzzi Laser model 192 with a dial valve. Specs are 1.87 sq ft, 200lb sand. 37gallons/min, 142 litres/min.
There are a few valves that can fit this filter. In order to confirm that the Jacuzzi Inc. Diverter w/ Gasket - 39068705R will fit we will need to ID the valve. Do you have a model number of the valve? If not, please send a photo of the valve to upload@inyopools.com.
Reply
I have a Jacuzzi 190L-S1LR6 I bought it with my used pool from a friend but the label on the top of the key assembly is faded so bad I cannot tell what the positions are for the valve settings can you help ?
Hi, Danny. You can replace the DVK-7 Cover - 39262605R000 or the DVK7 Complete Cover Kit - 39262605K.
Reply
The model numbers I have on my Jacuzzi sand filter are 22166508115E as well as Carvin 38263105. Leaking out the backwash and wondering if this key assembly with gasket fits my unit. Thanks
Reply
Hello will this fit a Carvin 39263020K 7 position dial valve (clamped into a Aquamax 200C-7C can I replace just this part of the whole diverter kit?
Reply
Good day, yes if you have the Carvin 39263020K 7 position dial the Diverter Repair Kit DV 6/7 - 39251509K would be correct.
Reply
Is this the correct replacement for my laser L225C filter. DV ASSY 7POS
1-1/2 V-FLN
I need the diverter valve for a 16 year old jaccuzi filter. It is a 6 position valve. 20 GPM/ft2 max working pressure 50 psi. No ID info. All worn off. Any chance to find a rebuild kit?
Reply
There should be a label on the side of your filter, could you supply us with the information from that label? Also could you supply us a few photographs of your filter including the label? Simply click the reply link below to provide the requested information so we may make the appropriate suggestion.
Reply
I have bubbles coming out of two return jets after opening. Upon inspection there are leaks coming out of the top of the sand filter while the dial is set to filter. Pictures are attached for a better look. It looks like its coming from the direction of the Filter, Waste, and also the pressure gauge I think. The problem is I don't know the model of the sand filter so I'm hoping the pictures will help. Would I need the diverter repair kit or a diverter with gasket? Any info would be a great help.
Hi Lawerence based on your photos I would suggest this Jacuzzi Laser Valve Diverter Repair Kit
Reply
Just from the pictures, would you be able to tell me the model of the sand filter just for my own reference? Also, is there a tutorial for the repair kit or is it pretty straightforward?
Reply
Hi Lawerence, You have this Jacuzzi Laser Sand Filter here is a Video on How to Replace a Pool Filter Valve Upper Handle Assembly it is a different valve but the process will be similar.
Reply
We were about to install the diverter repair kit but ran into trouble with the screws as they were stripped and hard to remove. The last picture shows that a piece of the top and middle assembly had come off. My question is, what are the part numbers that I would need for the top and middle assembly? Thanks.
It is hard for me to see if you have a 4 or 6 way DVK valve by Jacucci. I will provide the part page links for each below.Jacuzzi DV-4 Dial Valve http://www.inyopools.com/pool_parts_dv_4_dial_valve.aspx and or Jacuzzi 6 Way Dial http://www.inyopools.com/pool_parts_6_way_dial.aspx If you need to, you may upload an image from the top of the valve and I will be able to confirm with it.
Reply
I have a Carvin 39262803R with a Laser 160. Sand is getting into the pool. Is this the correct replacement?
Yes, this is the correct part for your model 39262803R multiport valve. Also, sometimes sand returning to the pool could be laterals as well.
Reply
I have a Carvin 39263105 what diverter w/gasket do I need??
Reply
Will this work on a 39262803 7 valve diverter for a 190l sand filter?
Reply
Hello, yes this diverter with spider gasket assembly is compatible with your Jacuzzi multiport valve part number 39262803.
Reply
