?     Asked on 10/10/2012by Guest

I need the fitting shown on the left in the main photo of this kit - is that included?
 Reply

A  Answered on 10/10/2012 by InyoPools Product Specialist Patrick P.

That fitting is included in the Plate, Face Kit (08428-0001).
 Reply


?     Asked on 11/5/2016by Matt

Hi - is this a suitable replacement for / compatible with the swimquip 8422-7 "eyeball" inlet or return valve? Thanks!!
 Reply

A  Answered on 11/8/2016 by InyoPools Product Specialist Scott W.

Do you have the dimensions for your current return? I am not finding part number 8422-7 and the one you are looking at is for 8428-7. If you send me the dimensions I should be able to see if it will be compatible for your current return.
 Reply


?     Asked on 4/18/2017by Inyo Visitor

I am looking for a replacement part for part number 8428-23 swimquip brand. This is the number on the cap we currently have. Is this part compatible to what we currently have?
 Reply

A  Answered on 4/29/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, this kit is compatible with the SwimQuip 8428 Series wall inlet.
 Reply


?     Asked on 6/20/2017by Linda

Hi my jet plate broke When my pool was replastered. The ball on inside has 8428-3 and the plate has swimquip 8428-7. Do you have this kit that contains these parts and if so how much. Thank you
 Reply

A  Answered on 6/21/2017 by InyoPools Product Specialist Patrick P.

This item here would be the correct replacement kit for your SwimQuip 8428-3 Jet.
 Reply


?     Asked on 9/17/2019by M J Skelton

Hi I have old swimquip eyeball fitting probably dating to 1960's. part number on plate is 8622-??? pool is in ground concrete. Plate diameter is measure 3 5/16" allowing for wear. fixing holes are at 1 15/16" centres or across the diagonal 2 3/4" see attached pic. can you supply replacements require 2 eyeballs and faceplate

 Reply

A  Answered on 9/18/2019 by InyoPools Product Specialist Lennox H.

Hi, M J Skelton. This is the correct replace inlet assembly that will replace the one you have. 
 Reply


A  Answered on 10/8/2019 by Product Owner

I can see that the suggested replacement part is similar. Can you please confirm screw fixing hole centres. Both centre to centre and across diameter. My in wall fitting is brass. Can you also give inner diameter of face plate as indication of eyeball diameter thanks
 Reply


?     Asked on 8/17/2020by Sally

Hello I have part number 8428-7B or part number 8428-6 that is on my inlet fittings. Do you carry these in stock? If so can you send me what part number you have so I can view it to make sure its the correct one.
 Reply

A  Answered on 8/17/2020 by InyoPools Product Specialist Lennox H.

Hi, Sally. Those parts are only available as part of this Eyeball Inlet Assembly - 08428-0001.
 Reply