?     Asked on 5/16/2015by ray

will this impeller fit my dirt devil qc rc9992 rampage made by aquavac
 Reply

A  Answered on 5/16/2015 by InyoPools Product Specialist Lennox H.

Ray, I'm not sure if this part can be used with your Dirt Devil QC Rampage cleaner. Hayward acquired Aqua Vac so you can give Hayward a call at 908.355.7995 to see if it can.
 Reply


?     Asked on 9/16/2015by Inyo Visitor

Is the Tiger Shark Impeller (11000) the same as the one on an excalibur? The filter got a hole in it and something came through and broke my excalibur impeller and every time I search for it it comes up tigershark impellor?
 Reply

A  Answered on 9/21/2015 by InyoPools Product Specialist Lennox H.

Hi, The Tiger Shark Impeller (11000) can work on the Excalibur cleaner.
 Reply


?     Asked on 5/28/2016by Sheila Reid

I have bought two of these tiger shark propellers. Once I put the vacuum in the water, the propeller only spins for a few minutes and I have to pull it out of the water and tap it to get it going again. It is literally stopping every 1 to 2 minutes. Any suggestions on how I can fix this?
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Alex V.

Sheila, If it keeps stopping, there may be something wrapped around the impeller shaft or the motor may be failing.
 Reply


?     Asked on 7/16/2016by Inyo Visitor

Will this fit the RC9950GR
 Reply

A  Answered on 7/16/2016 by InyoPools Product Specialist Lennox H.

Hi, This Impeller will fit the RC9950GR cleaner.
 Reply


?     Asked on 9/19/2016by Mike McCaffrey

Hello, will this fit my RC9742 model? Thanks
 Reply

A  Answered on 9/20/2016 by InyoPools Product Specialist Stacey M.

Hello Mike, That 3276-023 impeller fits your RC9742 model.
 Reply


?     Asked on 9/20/2016by Mike McCaffrey

does this impeller fit my Shark Vac RC9742? thanks
 Reply

A  Answered on 9/20/2016 by InyoPools Product Specialist Stacey M.

Hello Mike, That 3276-023 impeller fits your RC9742 model.
 Reply


?     Asked on 5/11/2017by sarah riley

Should I be able to spin the impeller manually? Our Tiger Shark is only working for a minute than shuts down. I've checked all the items on the troubleshoot list. When checking the impeller, I was wondering if the impeller should rotate. It doesn't move when i try to spin it manually. There seems to be no obstructions.
 Reply

A  Answered on 5/13/2017 by InyoPools Product Specialist Lennox H.

Hi, Sarah. You should be able to manually spin the impeller. This helpful TigerShark and SharkVac XL Robotic Pool Troubleshooting video can help you troubleshoot your unit.
 Reply


?     Asked on 8/12/2017by DOW Colet

Does this fit the shark rc990.?
 Reply

A  Answered on 8/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Dow. Yes, this Impeller will fit the TigerShark RC99 Series models.
 Reply


?     Asked on 8/13/2017by Inyo Visitor

Will this impeller fit my Water tech Blue Diamond model BLD03?
 Reply

A  Answered on 8/14/2017 by InyoPools Product Specialist Lennox H.

Hi. This Impeller will not fit the Diamond model BLD03. The replace propellers are listed on the Water Tech Blue Diamond & Blue Pearl Diagram page depending on the motor used in your unit.
 Reply


?     Asked on 5/20/2018by Dan Paddock

I chose Shark Vac not Tiger Shark and this impeller came up for the Tiger Shark.....is it the same impeller for both? My Shark Vac stopped going in reverse and when I looked inside to clean it out I found the the impeller had all three blades broken off. Would this cause the Vac not to go into reverse and what could have cased this to happen?
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Lennox H.

Hi, Dan. This Impeller - RCX11000 can be used with the SharkVac and Tiger Shak Cleaners. A broken or damaged impeller can cause the unit not to function properly. Over time it can become brittle, or debris can get caught in it causing it to break. 
 Reply


?     Asked on 6/23/2018by Brian

Is this impeller for model number 9950?
 Reply

A  Answered on 6/25/2018 by InyoPools Product Specialist Hector F.

Yes, this impeller will work for the model 9950 cleaner. 
 Reply


?     Asked on 6/26/2018by Danielle

Will this fit rc9990gr
 Reply

A  Answered on 6/27/2018 by InyoPools Product Specialist Hector F.

Yes, this part will fit on a model RC9990gr cleaner. 
 Reply


?     Asked on 8/18/2018by wyman davis

will this fitrc9740
 Reply

A  Answered on 8/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Wyman. Yes, this Tiger Shark Impeller will work with the RC9740 model cleaner. 
 Reply


?     Asked on 1/9/2020by Lux

Is it suitable for Tiger Shark 2 RC9957F?

 Reply

A  Answered on 1/9/2020 by InyoPools Product Specialist Eric J.

Hello, thank you for contacting inyo pools. Yes that part will work with the tiger shark.
 Reply


?     Asked on 5/17/2021by Richard Hibbler

Will this fan blade work on Hayward Tiger shark QC Model # RC9990CUB
 Reply

A  Answered on 5/17/2021 by InyoPools Product Specialist Patrick P.

Hi Richard, Yes this part does work on the Hayward Tiger shark QC Model # RC9990CUB
 Reply