How do I confirm the correct part number for a Hayward H200ED2 gas heater control panel assembly. The manual shows multiple part number due to 12 different Millivolt models.
Reply
The serial number can be used to locate the proper part based on the version.
Reply
I have an H400 is the HAXCPA1932 compatible with my heater?
Reply
Hi, Mike. There are different versions of the H400 heaters, this H-Series Control Bezel Assembly - HAXCPA1932 is compatible with the Hayward H-Series Electronic ED2. You will need to provide us with the complete model number.
Reply
Is this the correct control module for my model Hayward H400 pool heater?
Reply
Hi, Larry. This Control Bezel Assy will only fit the H400 H-Series Electronic Heater (ED2).
Reply
I am looking for a control panel that will fit my H200ED2 heater. Model # 30210388. Will this one work for me?
Reply
Hi, Tangela. Yes, this H-Series Control Bezel Assembly - HAXCPA1932 will work with the H200ED2 model heater.
Reply
Is this compatible with hayward h series model h400fdn control panel
Reply
Hi, Ray. This H-Series Control Bezel Assembly - HAXCPA1932 is NOT compatible with the H400FDN model. The replacement parts for your model unit are all listed on the Hayward Universal H Series Low Nox Heaters Parts Diagram page.
Reply
I have a MODEL H300ED2 SERIES ELECTRONIC pool heater. Does this part fit/replace PART# HAXCPA1930
My units Serial number 130601101050001.
My problem is that I can't turn the unit on every time i push the button. Works intermittently. Also not all the LEDS light up only showing a partial number..
Reply
Hi Frank, this Control Bezel Assembly does work on the Hayward H300ED2 Pool Heater.
Reply
Is this the correct part for an HP150ED2 natural gas heater? Our temp buttons will no longer allow us to move temp up and down. Thanks
Hi Hannah, Yes this the correct replacement control panel for an H150ED2 natural gas heater.
Reply
Does the haxcpa 1932 bezel assembly work for the H350
Ser# (21) 130604101049001
Reply
We need to know the complete model number of the unit. This is for The ED2 Style
Reply
Based on the serial # we think you may be after part # FDXLBKP1930 the serial # tells us what plant it was manufactured in as well the yr but does not specify the actual heater model. Can you tell what the complete model # is.
Reply
Is this the correct control panel for the following natural gas heater:
Model No: H150ED2
Serial No.: (21) 1306011003566001
Reply
If this part doesn't fix my heater can I return it for a refund ? I think it's going to but if not I'm going to have to get a new heater
Reply
Hi, Don. Unfortunately, once this part has been installed, it CANNOT be returned unless it is deemed defective.
Reply
Does this incorporate the ICB board, can you buy it separately a H200 ED2
Reply
Hi, Mark. Yes, it does and it's only available with this Control Bezel Assembly - HAXCPA1932.
Reply
I have the MODEL H4001DPL SERIES 40635034. Will this part work for this?
Reply
Hi, Natalie. The Bezel/Touchpad Assembly - IDXLCPA1930 is the correct replacement for your model.
Reply
I have a H350PED2 - SN 130706106096001 Heater. I can't change/adjust the temperature settings to raise/lower the water temperature. Is this panel & attached circuit board what is needed to repair this issue?
Reply
Hi, Tom. This Control Bezel Assembly - HAXCPA1932 is the correct part you will need to replace based on your unit's info.
Reply
I have a Hayward
H150PED2 propane fuel heater is this correct part number
Hi, James. Yes, this is the correct Control Bezel Assembly - HAXCPA1932 for your model unit.
Reply
Is there a difference between the or are they interchangeable HAXCPA1932and HAXCPA3153 Hayward said that is supposed to be the one It is a self-igniting unit
Reply
Hi James, yes these two parts are essentially the same. The only difference is that HAXCPA3153 also has the panel attached to the bezel while the HAXCPA1932 is the bezel assembly alone.
Reply
H250ED2 Hayward heater
Control Bezel
HAXCPA1930 HAXCPA1932 Are they the same part?
Reply
Hi John, the correct control bezel for the Hayward H-Series ED2 series pool heater is part number HAXCPA1932.
Reply
I have an older H400 Series heater and need a HAXCPA1930. Will the HAXCPA1932 work on my older model?
I really only need the board shown in the photo if you sell those even better.
Thanks in advance.
Hi Steve, Can you give us the exact model # of your heater, it should be something like H400ED1, H400ED2, H400PED1, H400PED2, etc.. Simply click the reply link below to supply this information and then we can make the proper reccomendation.
Reply
I have an H400ED2 model.
Reply
STV thanks for the model information! This HAXCPA1932 H-Series Control Bezel Assembly is the proper replacement for your H400ED2 heater. The PCB in your photo not available by itself and is only available as part of this HAXCPA1932 assembly. We do currently have this part in stock but our inventory has been selling very quickly so I would suggest ordering as soon as possible.
Reply
Will this control fit the H400PED2 Model?
Reply
Hello Michael. The Hayward Pool Products H-Series Control Bezel Assembly HAXCPA1932 is the correct control bezel assembly for the Hayward H-Series Electronic ED2 Style Heater, model H400PED2.
Reply
