Where would this item be installed in conjuction with the pool equipment?
Reply
Hi Jeff, The Body Manual Air Relief Assy Clear (273564) is to be installed only on the Lid of the Pentair Triton C-3 Commercial Sand Filter.
Reply
What is a normal amount of time this part will last? I have had to replace mine several times.
Reply
Hi, Mr. J. Baxter. This part does not have a life span. How long this part will last will be based on the operating condition.
Reply
how can I take the bleeder valve out if the thread is bold and I can't get it out the tank?
Reply
Sorry but there is no way for us to answer your question. It will be a counter clockwise removal, if it was cross threaded on the installation then the damage is most likely already done & you may find you have an issue with the threads on the tank.
Reply
Will the above air relief assy clear body fit a Pentair Triton II High Rate Sand Filter TR 100
Reply
Do you have a video of instructions to change this item?
Reply
Brian, Unfortunately, we do not have a video. There is a nut that holds the assembly in place. It is located underneath the black filter lid. The filter lid must be removed using a special wrench (Pentair 154527). Once the lid is removed, you will have access to the nut that holds the air relief assembly in place.
Reply
Will this work with a Triton TR 100 and if so what additional parts would be needed to replace the top gauge? Thanks
Reply
Hi Steve,I am not 100% sure what is broken on your filter. But here is a link to the correct Parts breakdown for your Triton TR100. You should be able to find what you need by clicking on those filter part links.
Reply
