Is this a set of 2 o-rings and are they the same size?
Reply
The 5020-135 Lid O-ring is a set of 2. Both are 8-1/2” outside diameter and 8” inside diameter. One is a round o-ring, the other is an o-ring with a square cross section instead of round.
Reply
I have a Jandy jhp 2.0 filter motor
I need a lid gasket ring
Only number on lid is 634065
What gasket part do I need for lid o ring gasket
Filter is a Jandy del60
Reply
The correct lid o-ring for the Jandy Stealth Original (2002-2008) JHP is the Lid O-ring (r0555400). You can click on the link to view the product page.
Reply
Thank you for your first answer I see the product I need has two gaskets in it
How does that work I only have one gasket on the lid now
Reply
Dennis, This comes as a set of 2 but only one is needed depending on which gasket you have.
Reply
Have shpf1 stealth pump with integral basket screen need the basket lid print parts Legend poor confused as to the right part for my one horsepower pump
Reply
Hi Herb, This Lid Seal and O-ring will fit the Jandy SHPF pump which is also included with the Lock Ring, Lid, & O-ring (R0445800).
Reply
Looking for O ring for the lid on the little basket filter for a Jandy Model # JEP1.5. the pump is a Jandy Pro Series by Zodiac. It is an e pump series.
Reply
Hello Fred, the 5020-135 is the orings for the lid you would need.
Reply
I have a Jandy Stealth pool pump. The basket has an embossed # 634065.
I am looking for:
(1) a seal for the lid - Parts diagram shows 2 seals
(2) as well as one for the pump motor to basket case and
(3) an inline check valve flapper.
any help you can give me would be appreciated
Thanks
Reply
What is the model number of your Stealth?
Reply
I am looking for the right part# for Lid O-ring
Jandy pro Series
Model# VSSHP270AUT
Serial # E15JKE1964
Reply
Hi, Giovanni. This Lid Seal & Lid O-ring - R0446200 will fit your model pool pump.
Reply
On my Jandy SHPM 2.0 pump can the O-ring be replaced or do I have to buy a new lid and with an o-ring? One website said R0446200 wouldn't work with SHPM2.0?
Reply
Hi, I have a Jandy stealth with a model number JHP 1.5. I need the o-ring for the lid. Is this the right one? Thanks
Hi Matt, The o-ring on this page is not the correct o-ring for your Jandy JHP Pump. You will need this Jandy JHP Lid O-Ring which we do have in stock ready to ship!
Reply
Hello,
I need a lid seal and gasket for a Jandy Stealth model SHPF 5.0. Will this work?
Thanks.
Reply
Hi Fred, yes this lid seal and gasket are correct for the Jandy Stealth SHPF series pool pump.
Reply
Is this the right basket lid seal for a jandy pro series stealth SHPH 1.5
Thank you for contacting Inyo Pools, Yes the Lid Seal & Lid O-ring - R0446200 is the right O-ring.
Reply
Is this the right o-ring for the JANDY STEALTH SHPF 2.0?
Reply
Thank you for contacting Inyo Pools, Yes the Lid Seal & Lid O-ring - R0446200 is the right O-Ring for the SHPF 2.0. if it is after 2008.
Reply
The pool was built in 2007.
Reply
If you have the SHPF Model by Jandy there is only one backplate O-ring to recommend. The Backplate O-Ring, Generic - R0446300 9-1/2" ID, 3/16" Cross Section O-521 is what is suggested, make sure use Magic Lube O-ring Lubricant 1 Oz. Teflon - 630 for proper sealing.
Reply
