Can't I just buy the o ring in the lid?
Reply
Joe, Yes you can, Jandy lid O-ring.
Reply
The part that i need is R0558900 and its been obsolete do you think that the RO448800 will fit my pump?
Reply
The Lock Ring, Lid, & O-ring (R0448800) will not take the place of the now obsolete Pot Lid With Clamp Ring (R0558900).
Reply
I need a new O ring for a Jandy Plus HP pool pump filter basket. The model number on the pump is PHPM 1.0. Does your company carry this item? If so, what is the information (part number etc) I will need when ordering this part?
Reply
David, Lid O-ring (R0449100) would be the replacement o-ring and seal gasket for your Jandy PHPM 1.0 pump.
Reply
I have located product number r0448800 Lock Ring, Lid, and O-Ring but just need the O-Ring. It is for the Jandy Pro Series Plus HP HP 2.0. Model Number is PHPM2.0. I believe I am on the right track but can you tell me which O-Ring is the right fit please?
Reply
Hi Elliott, The Lid O-ring (R0448800) will be the correct o-rings for this lid assembly.
Reply
I need the lock ring, lid & oring with part # A0578100 on it. Do you carry that part and have it in stock? Thank you for your time.
Reply
Hi Laura, This Lock Ring, Lid, & O-ring - R0448800 is a substitute for p/n A0578100.
Reply
I need to replace the plastic lid for our Jandy Plus HP Model PHPM1.5 filter. Do I need to replace the lock ring as well? If so is this the correct replacement part for part A0578100?
Reply
Hi, Diane. The lock ring is included with the lid and the o-ring, this is the correct part for the PHPM pump.
Reply
I have a Jandy MaxHP MHPM.75 I need a locking ring,lid and o ring part # AO578200 is there a replacement part still made
Reply
Hi, Mike. This Lock Ring, Lid, & O-ring (R0448800) is the correct replacement for p/n A0578200 for the Jandy MaxHP MHPM pump.
Reply
I need just the O ring for the lock ring lid for Jandy model PHPM 1.5-2. Can I get just the O ring?
Reply
Hi, Terrence. The Lid O-ring - R0449100 is the o-ring only for the PHPM pump.
Reply
I have a Jandy Plus HP Model PHPF1.5 Serial N08Fa0018 and I am looking for the o-ring for the lid. I keep thinking it is part # R0449100 but that comes with an o-ring and seal. I don t see that my set up has the seal? Please advise
Thanks Todd
Reply
Hi, Todd. The O-ring is available with the Lid O-ring - R0449100. You don't use both, it one or the other, Instructions are available in the Lid Seal and Lid O-ring, and Basket, Replacement Kit Instructions.
Reply
I HAVE A JANDY POOL PUMP
SERIAL NUMBER 413FC1416 HAVE A MODEL #PHF.75
I'AM LOOKING FOR THE O RING BY ITSELF WHERE WOULD I FIND IT?
Reply
I am looking for a replacement pot lid and O-Ring for a Jandy MODEL # PHPU 1.5 serial # G05FA2273. Will this item fit ?
Hi Trent, Unfortunately the lid for the Jandy MODEL # PHPU 1.5 has been made inactive by the manufacturer without a replacement.
Reply
I am looking for replacement lids for the following pumps (ring and sight glass)
PlusHP model PHPM1.0 serial # R10FK1319
PlusHP model PHPM2.5 serial # P08FG1315
Can you help me with the selection?
Reply
I HAVE A JANDY POOL PUMP MODEL PHPU 2.5 CP. NEEDS A POT LOCK RING LID AND O-RING. ARE THEY AVAILABLE ? IF NOT,ANY OTHERS THAT COULD FIT? THANK YOU
Reply
Unfortunately, no, there is no replacement for the lid and the pump will need to be replaced if you cannot locate a dealer or person that has one. If you need to replace the pump due to this, the Waterway Champion 2.0 HP Full Rate EE Pool Pump 230 Volts - CHAMPE-120 is an ideal replacement to the current. Please review the dimensions of the pump to compare to the current.
Hello, I'd like to buy a replacement for the lid of my pump which I model PHPM 1.5 serial #R10F10390 plus HP Jandy Zodiac. The pump cannot prime by itself. But if I just open the lid and close it starts priming. Please help me with the choice of replacement lid.
Reply
Hi, This 5020-039 PHPM Pump Lid will be the correct replacement pump lid for your PHPM1.5 Jandy Pump
Reply
Do you sell just the o ring?
Reply
Yes here you may purchase just the Lid O-ring for this Jandy Pump
Reply
I need the sight glass for jandy pump model # PHPM2.0. Only # i see on it is A0578100, do you sell this sight glass?
Reply
Thank you for contacting Inyo Pools, The are the parts you needLock Ring, Lid, & O-ring - R0448800 Is the only way it comes
Reply
Will this cover fit my Jandy Pro Series pump Model# VSSHP270AUT .
Thank you for contacting Inyo Pools, The correct replacement lid for your pump Is Jandy ePump Lock Ring, Lid, & O-ring - R0445800
Reply
Thank you kindly.
Reply
