i have a 20 x 40 oval inground pool . will the cfr-150 be big enough for filtration.
12.5 ft in deep end . aprox 42000 gal of water
Reply
Mark, This filter can work for your pool size as long as your pump doesn't exceed 150 GPM flow rate.
Reply
Does this come with all parts ie: cover, locking nut, dirt catcher, drain plug, bleeder valve and pressure gauge? Does the cartridge filter come with this?
Reply
Hi Bruce, yes this is the complete Jacuzzi CFR-150 Cartridge Filter which includes the cover, locking nut, dirt catcher, drain plug, bleeder valve, pressure gauge and cartridge.
Reply
What is the difference between this model and the Jacuzzi® J-C150 150 sq. ft. Cartridge Pool Filter?
Reply
Both filters are very similar. There are differences in the body style and the J-C150 states a lower pump pressure required for filter operation. Essentially, both will provide 150sf of filtration.
Reply
I have a 27 round pool approx. 54 in height with a 1 1/2 hp pump. I don't know anything about gpm. Will this filter work for my pool and pump?
Reply
Hi Christine, that filter will fit your system.
Reply
I'm in the process of pulling a permit for an 18,000 in-ground pool. The pump is a 3HP Pentair Intelliflo. Engineering requires 2" plumbing and a131sf cartridge filter at 46gpm. It appears this filter will work. The building department is asking for a cut sheet on my proposed filter. Do you have specs that show the flows, etc. that will satisfy them?
Reply
Hi Willie, Page 2 of this CFR-150 Filter Manual should be good for the engineers for permitting.
Reply
I am looking at your Jacuzzi filter CFR-150. I also researched the Jacuzzi J-C150. Do you carry and sell the J-C150 model? If not, and I purchase the CFR-150, is this a complete unit I.E. all parts included and inside filter and dirt catcher too? Thanks
Reply
Hi Tim, This CFR-150 is the complete filter which includes all the parts like the cartridge, dirt catcher, etc.. We do not carry the Jacuzzi J-C150 filter.
Reply
