Can you add an extension pipe to this fountain? Do you have a diagram of the parts?
Reply
Hello Rick - The unit comes sealed so according to their technical dept at Customer Molded Plastics there is no diagram. For the extension, it is just a matter of how much PVC you need to reach the surface. The only limit is the amount of pressure you have coming out.
Reply
Is this floating fountain battery operated??
Reply
Rickey, The fountain connects to your return line and is not battery operated.
Reply
I can simple use this as a replacement return attached fountain replacing the the simple eyeball fitting that's pointed straight up on my tanning ledge, but is this just a transparent plastic or is it LED lit?
Reply
This is just transparent plastic with no LED light.
Reply
We are interested in the floating fountain but was wondering if you had one that would be blue. Also we are looking for a blue light to add to the waterfall coming from our jacuzzi down to the pool underneath.
Reply
Brenda, Unfortunately, we do not have this fountain in blue or a illuminated version.
Reply
Is this the complete fountain or just parts? What else would I need for this fountain to be fully functional?
Reply
Hi, Stephanie. This is just the 3-Tier Fountain Head. You will need to have the water supply line installed.
Reply
I assume that the water height and width will be relative to the water pressure, but can you offer an indication of the height - width ratio? Our sun shelf return bubbler location is within 25" of the pool's edge - so I am wondering if the spray pattern will be too wide - that it will spray water onto the deck.Thank you in advance.
Reply
Hi, Kathryn. The pump size will determine the fountain jetstream. We're unable to be more precise. Once installed and it's wider than needed, you can reduce the flow if a diverter valve is installed on the feed line.
Reply
