How do you determine whether you need a 1 1/2" or 2"vari flo multiport valve. I ordered a 1 1/2" valve order #6500069288, p/n SP0710x62.
Reply
Hi Richard, The Valve size is based off of the plumbing size you have. The SP0710x62 valve has 1-1/2" ports.
Reply
I have a Hayward 2 in side valve mount s310s bead filter. The model #on the top of the valve says sp715. Will this generic side valve fit the filter?
Reply
Hello Scott, yes this is the generic valve replacement for the SP715 side mount valve.
Reply
I currentlly have a Hayward vAri-flo valve Sp715
will this vari-flo valve fit my Hayward sand filter model S244S If it does not fit may I return it for arefund. Joe
Reply
Hi. This Generic Side Mount 2" Valve will fit the Hayward S244S filter and can be returned if it does not fit.
Reply
Where should I measure to determine what size is my valve before ordering new one
Reply
Hi Steven, The best bet would be to give us the model # of your filter. There should be a label on the tank of your filter and the model # can be found there. Also if you could take a look at the plumbing going into the filter is this 1.5" or 2" there should be digital writing on the plumbing or the fittings which say 1.5" or 2". Or you could send a few photos with this information. Simply click reply link below to supply this information or photos.
Reply
NECESITO EL ROTOR DE rotor para hayward variflo xl modelo: sp 071621
Reply
Necesitará este rotor SP071621 y esta junta de araña
Reply
I need to replace the spider gasket and O ring gasket for this generic valve 27517-204-000. What are the part numbers for them?
Reply
Does this model replace the sp0710xr50 model?
Hi Jerry, No this model does not replace the Hayward sp0710xr50 model. Unfortunately, all retailers are currently out of stock on the sp0710xr50 valve as there has been a shortage with the manufacturer on this valve. You could go with this Hayward DE Slide Valve as a replacement however you may need to do a little re-plumbing. Another option would be to replace your Upper Handle Assembly and your Spider Gasket as this typically will eliminate any leaking. If you go this route you will also need this Spider Gasket Adhesive to install the Spider Gasket.
Reply
