?     Asked on 9/10/2016by Ricky Bull

How do I know the hooks will align with my pool?
 Reply

A  Answered on 9/11/2016 by InyoPools Product Specialist Stacey M.

Hello Ricky, the 18 X 36 Aquamaster Solid Blue Rectangular 15 Year (2 Years Full) Safety Cover W/ 4X8 CES is just like the picture, if you have any differences please fill out custom cover form. http://media.inyopools.com/documents/form/Inyo-Safety-Cover-Measuring-Form-2015.pdf
 Reply


?     Asked on 9/15/2016by David Thomas

What about water on top?
 Reply

A  Answered on 9/15/2016 by InyoPools Product Specialist Joe S.

Good day, this solid cover with have a 5x5 center mesh drain, which will allow water to drain through.
 Reply


?     Asked on 9/27/2016by Inyo Visitor

How tight should you make the straps?
 Reply

A  Answered on 9/29/2016 by InyoPools Product Specialist Joe S.

Hello George, you would want to go with 60 percent to 70 spring compression
 Reply


?     Asked on 8/18/2017by MARK

THE SOLID COVER HAS A 5'X5' MESH AREA IN MIDDLE, HOW DO YOU KEEP WATER FROM OVERFILLING THE POOL? I HAVE USED SOLID COVER IN YEARS PAST AND USED A PUMP AND WATERHOSE TO GET WATER OFF TOP OF COVER???
 Reply

A  Answered on 8/18/2017 by InyoPools Product Specialist Stacey M.

Hello Mark, with the safety covers and the 5x5 mesh area, normally you would drain your pool down a few feet to so if there is rain you have the room for a possible rise in water level.  The mesh area should not have standing water.
 Reply


?     Asked on 9/26/2017by Steve

Do your safety covers include the spring extension lever to fix the cover to the brass pegs? Thank You.
 Reply

A  Answered on 9/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Steve. The installation rod is included with each cover.
 Reply


?     Asked on 8/10/2019by carroll w colford

how much difference weight VS mesh
 Reply

A  Answered on 8/14/2019 by InyoPools Product Specialist Michelle B.

Hello, The solid cover will be around 5lb mores.
 Reply


?     Asked on 8/21/2019by carroll w colford

what is the actual length and width of a safety cover for a 18x36 pool with 4x8 steps
 Reply

A  Answered on 8/21/2019 by Industry Professional

The cover will have a 1-foot overlap on each side.
 Reply


?     Asked on 9/6/2019by jessie warrix

How much weight can it hold before it will give in.Like if a kid walks on it will it give in
 Reply

A  Answered on 9/6/2019 by InyoPools Product Specialist Lennox H.

Hi Jessie. This cover is designed to and exceeds the ASTM F1346 Pool Safety Cover Standards. This test shall be conducted to demonstrate that the cover is capable of supporting a weight of (a) 485 lbs (composed of one 210-lb, one 225-lb or one 50-lb weight) for pools or spas within a width or diameter greater than 8 ft or (b) 275 lbs (composed of one 225-lb and one 50-lb weight) for a pool or a spa with a width or diameter equal to or less than 8 ft distributed over 1 ft2 each, all of which are within a 3-ft radius without the test objects causing damage which would allow any of the test objects to pass through the cover. During this test there shall be no requirement for the absence of water appearing on the surface of the cover.
 Reply


?     Asked on 9/23/2020by Brad Brown

Hi, I currently have a mesh safety cover. Would this solid safety cover use the same anchors as my mesh cover? I would not want to have to re-drill and put in new anchors. Thanks!
 Reply

A  Answered on 10/30/2020 by InyoPools Product Specialist Hector F.

Hi Brad, in order for us to match your current anchor points we will need this safety cover measuring form filled out and emailed to us at upload@inyopools.com
 Reply


?     Asked on 8/25/2021by Brent Lowman

How far apart are the straps on the solid 18x36 safety cover and can I get one without the 5x5 mesh?
 Reply

A  Answered on 12/30/2021 by InyoPools Product Specialist Joe S.

Good day, our stock covers range from 3-5 feet strap spacing. If you are wanting a 5x5 unit or one to match anchor points we will need a measuring form filled out and submitted. 
 Reply