Am interested in purchasing above cover. Could you describe the midline entry section dimensions (ie. where steps are located). Thanks very much.
Mark Halterman
Reply
The cover dimensions for the steps going to be 4x8.
Reply
I am looking at the picture on this site and it looks like the cover may not be an exact rectangle. It looks like some of the edges are rounded a bit. I am not sure if that is exactly what it is really like or not. My old cover WAS a rectangle with the center end step. Can you clarify?
Reply
Hello Mike, it will be straight 90's no radius corner.
Reply
what does CES stand for and what does the warranty of 18 yrs (2year) mean?
Reply
Hello Louis- The CES stands for Center End Step, it signifies that the 4'x8' step section is located on the center of the cover. Also the warranty is pro-rated, the first 2 years would be a 100% warranty for defects on the cover, years 3-16 would be pro-rated meaning you will only get a portion of the cost of the cover covered under warranty.
Reply
Can you do a cut out for the pool ladder?
Reply
Hi, Daniel. You will have to have a custom cover made if a ladder cutout is needed. Please complete our Custom Cover Form.
Reply
i am replacing a Mcquen cover will it match up
Reply
Hi, Joe. Unfortunately, it will not match exactly. We can use your existing cover as a template to make a new one using our Cover Repair or Template by Cover Doctor Program.
Reply
Wanting a new 20' x 40' mesh cover w/ 4' x 8' CES. I am trying to match to existing anchor bolts. My anchor bolts are 63" apart with 8 bays adding up to 42'. Will your mesh cover match?
Reply
So in order for us to confirm if our cover will fit your design please fill out and send in this safety cover form so our cover department can review and further advise.
Reply
My pool cover is 20 x 40, with 63" spacing along the length, will this cover match up. It has 4' x 8' CES and is 22' x 42' actual length
Reply
These cover designs are not all the same based on the manufacturer so for this instance we would recommend filling out this safety cover measuring form and sending it into us so we can confirm for you.
Reply
How do I have to measure my pool to order the right size cover? Inside edge or outside edge x the width /length?
My pool is rectangular with stair at one end, on the center.The other end has a jumping board but I can't move it from there. Is built in.
What kind of drill do I need to make holes for the screws?
Thanks.
Hi, Antonio. Your pool shape is Grecian. You can use the How to Fill out a Custom Safety Cover Form, or How To Measure Your In Ground Pool For A Safety Cover guides.
Reply
On this cover, your - 20' x 40' Rectangular w/ 4' x 8' CES Green Mesh Safety Cover 18 Year (2 Years Full) - PL7441 - how many straps are there - my old cover has 34 anchors.
Reply
Hello Bart, the PureLine 20' x 40' Rectangular w/ 4' x 8' CES Green Mesh Safety Cover 18 Year (2 Years Full) has 30 anchor points. If you wish to match the points we suggest sending in a AB form with a layout of the pool.
Reply
How do we see a pictture of the pool cover completely laid out on a pool? (20 by 40)
Reply
Good afternoon, Dee. At this time we do not have a program that will show this cover laid out on your pool. Only photo is the stock photo.
Reply
