?     Asked on 1/11/2012by Guest

How do you weigh the steps down to keep them from floating?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

In order to weight the step down both side panels will need to be filled with 25 pounds of sand.
 Reply


?     Asked on 6/19/2012by Guest

What are the rise on these steps?
 Reply

A  Answered on 6/19/2012 by InyoPools Product Specialist Patrick P.

The rise on these steps are roughly 11 inches per step.
 Reply


?     Asked on 4/12/2015by Inyo Visitor

Will this step work with a splash super pool? The bottom is flat, but there is a slope where the walls start to rise, looks like on these stairs there is an angle to accommodate for that.
 Reply

A  Answered on 4/13/2015 by InyoPools Product Specialist Alex V.

Bill, The back of the steps are angled to accommodate pool cove if that's what you're referring to.
 Reply


?     Asked on 9/11/2016by Max

how deep, from front to back?
 Reply

A  Answered on 9/12/2016 by InyoPools Product Specialist Stacey M.

Hello Max, Dimensions: 45 inches H x 38 inches W x 35 inches D
 Reply


?     Asked on 6/7/2017by Ralph

Is all metal hardware stainless steel to prevent rust
 Reply

A  Answered on 8/3/2017 by InyoPools Product Specialist Alex V.

Ralph, Yes, the hardware is stainless steel. 
 Reply


?     Asked on 10/2/2017by Winter removal

This was advertised as an easy to remove pool step system. I am not sure if two strong people can pull this out of my pool, let alone me, by myself Any idea how to easily remove it?
 Reply

A  Answered on 10/3/2017 by InyoPools Product Specialist Lennox H.

Hi. According to the Mighty Step Installation Instructions " IT WILL REQUIRE 2-3 PEOPLE TO LIFT STEP OVER POOL SIDE WALL." 
 Reply


?     Asked on 10/29/2019by Robert

Is there an optional set of foot pads available that would raise the ladder an additional 3 to 4 inches?
 Reply

A  Answered on 10/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. Unfortunately, there is not a base available. 
 Reply