Will these ledge covers fit 24 ft round doughboy pool?
Reply
Hi, Sherri. This Ledge Cover - 1030009E00 will not fit a Doughboy Pool. We do not carry parts for Doughboy Pool's, you will have to reach out to Doughboy directly.
Reply
Will this cover plate fit a 15' round "Oasis Reprieve" above ground pool? The pool was purchased in 2013.
Reply
Hi, Cindy. I was not able to cross reference this cap to an Oasis Reprieve above ground pool. Please provide the following images of your pool, Outside Pool Wall (Top to Bottom), Top Cap, Top Rail, and Upright.
Reply
Do you have covers for existing aluminum coping for inground pools?
Reply
Hi, Toni. We have replacement covers for the following Cinderella Aluminum IG Pool Coping.
Reply
Will this clip fit the metal frame of an Intex 26’ Ultra Frame pool? We are installing a replacement overlap liner using the worn out Intex liner underneath it.
Reply
Donald, Unfortunately, this will not fit an Intex pool.
Reply
I have an Esther Williams 18 foot round and was wondering if these would fit that pool type? I can't find the replacements anywhere
Reply
Hello Brian - We can't guarantee the 1030009E00 would fit an Esther William's pool. My suggestion would be to try the following site. They carry EW parts. TeddyBearPools.com
Reply
I need top seats for an 18 X 33 inch oval pool.
I bought it at namco and they said i need 8" top seats that are 56 1/8
Siena
their part number is CPP 1184S
thank you.
Reply
We'd be glad to assist you. Could you send us pictures of the outside pool wall, top cap, and top rail? That will help us confirm the correct replacement parts.
Reply
I have a XL 7000 oval 52" pool and need to replace the top connecters part number shows as 361X24 and I can't find them do you know of a replacement that will work? Our pool is a Swim 'N Play.
Reply
The XL 7000 for is for a Swim and Play Pool and we do not carry parts for Swim and Play. You may be able to locate them at www.swimnplayparts.com
Reply
Do y'all carry parts for Quantum Pools. I am needing a ledge cover.
Reply
The Quantum name may have been used on multiple pool models. The schematic we have is for an Aqua Leader Quantum pool. The ledge cover on that list is part number 1030009E00. If this looks exactly like your ledge cover, it should work. If your ledge cover looks different, send us a picture.
Reply
Ledge cover. Awesome thank you. Our model number in the quantum pool is. NRRC00245. Maybe this will help better.
Reply
Hi Steven, Unfortunately we did not match anything on that part. We do show this ledger was used on the Quantum pool. I would suggest matching your ledge cover up the dimensions found through this link - Dimensions of Quantum Ledge Cover If they look to be similar you may want to order 1 to see if it works. If it does not work then you can always return it and you would just be responsible for the return shipping charge.
Reply
